JVC AV-14F3 - Manual (Page 21)

No. 52026
AV-14F3/AV-1435
AV-1435EE/AV-1435TEE
AV-14FMT3/AV-1438
AV-14FMG3/AV-14FMG3B
21
Item
Measuring
instrument
Test point Ad justment part Description
Ad justment
of DELAY
POINT
(AGC) Signal
generator
Remote
control unit
DELAY POINT
(AGC TAKE-OVER)
1. Input a blac k and white signal (colour off).
2. Enter the SERVICE MENU.
3. Select 1. IF from the SERVICE MENU.
4. Select 2. DELAY POINT by pressing the 2 key on the remote
control unit.
5. Set the setting values of the setting items as s hown bellow table.
6. Then adjust the MENU - or + key until video noise disappears.
7. Turn to other channels and make sure that there are no
irregularities.
Setting Item Variable range Initial setting value
MATSUSHITA
(QAU0287-001) NT SC 3.58
45
DELAY POINT
(AGC TAKE OVER)
OTHER
0～127
35
DELAY POINT UHF
AGC TAKE-OVER **
- / + : OPERATE DISP : EXIT