JVC COMPACT VHS CAMCORDER GR-AXM30 User Manual

Page 37

Remote sensor

Transmitted beam
effective area

When using the remote control, be sure to
point it at the remote sensor. The above
illustration shows the approximate transmitted
beam effective area for indoor use.
The transmitted beam may not be effective or
may cause incorrect operation outdoors or
when the remote sensor is directly exposed to
sunlight or powerful lighting.

1MIN

INDEX

1/2S

Index Code
Marking

START/STOP

VISS

REC TIME

INT. TIME

RM-V704U or RM-V700U
(provided)

Rec Time Indicator

Interval Timer Indicator

LCD monitor
or viewfinder

FEATURE:

Self-Timer, Animation and Time-Lapse

PURPOSE:

The remote control lets you set/release
Interval Timer and Rec Time functions as
well as the Menu screen.

OPERATION:

Self-Timer
1) Set

Instead of performing steps 1 through 3
on pg. 26 (“Self-Timer”), press INT.
TIME on the remote control. Each time
INT. TIME is pressed, the Interval Timer
indicator appears, changing in the
following order: 15S, 30S, 1MIN, 5MIN
and No indication (off).

2) Release

Instead of setting “INTERVAL TIMER” to
“OFF” in the Menu, press INT. TIME on
the remote control until the Interval
Timer indicator disappears.

Animation
1) Set

Instead of performing steps 1 and 2 on
pg. 27 (“Animation”), press REC TIME
on the remote control. Each time REC
TIME is pressed, the Rec Time indicator
appears, changing in the following
order: 1/4S, 1/2S, 1S and No indication
(off).

2) Release

Instead of using the Menu in step 5 on
pg. 27, press REC TIME on the remote
control until the Rec Time indicator
disappears.

Time-Lapse
1) Set

Instead of performing steps 1 through 3
on pg. 27 (“Time-Lapse”), press INT.
TIME and REC TIME on the remote
control. Each time INT. TIME is
pressed, the Interval Timer indicator
appears, changing in the following
order: 15S, 30S, 1MIN, 5MIN and No
indication (off). Each time REC TIME is
pressed, the Rec Time indicator
appears, changing in the following
order: 1/4S, 1/2S, 1S and No indication
(off).

2) Release

Instead of using the Menu in step 5 on
pg. 27, press INT. TIME and REC TIME
on the remote control until the
indicators disappear.

NOTE:

Also refer to pgs. 26 and 27.

FEATURE:

Index Code Marking

PURPOSE:

To give you automatic access to any
selected point on a recording.

OPERATION:

1) Press VISS once to place the index

code. “INDEX” blinks in the LCD
monitor or the viewfinder during
marking.

NOTE:

If VISS is pressed during Record–Standby
mode, the mark is placed where START/
STOP is pressed.