JVC COMPACT VHS CAMCORDER GR-AXM30 - Manual (Page 14)

14
EN
RECORDING Basic Features
FEATURE: Zooming
PURPOSE: Varies the focal length of the lens
and produces the zoom in/out effect.
OPERATION: Zoom In
1) Push the power zoom lever down
towards “T”.
Zoom Out
1) Push the lever up towards “W”.
NOTES:
● The further the power zoom lever
is pushed, the faster the zoom
speed becomes.
● Focusing may become unstable
during zooming. In this case, set
the zoom while in Record-Standby,
set manual focus or Focus Lock
(
੬
pgs. 18, 19), then zoom in or
out in Record mode.
FEATURE: Quick Review
PURPOSE: To check the end of the last record-
ing.
OPERATION: 1) Press “ ” and release quickly
during the Record-Standby mode.
•Tape is rewound for about 2
seconds and played back
automatically, then pauses in
Record-Standby mode for the
next shot.
NOTE: Distortion may occur at start of
playback. This is normal.
FEATURE: Retake
PURPOSE: To re-record certain segments.
OPERATION: 1) Make sure the camcorder is in the
Record-Standby mode.
2) Press either RETAKE button to
reach the start point for new
recording.
Pressing “F” fast-forwards the tape
and pressing “R” reverses it.
3) Press Recording Start/Stop button
to start recording.
NOTE: Noise may appear during Retake.
This is normal.
Zoom indicator
Zoom-in
Zoom-out
RETAKE (R/F)
Power zoom lever