JVC LVT1002-012B - Manual (Page 68)

65
AV COMPU LINK remote control system
The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV, DVD player and VCR) through this
receiver.
This receiver is equipped with the AV COMPU LINK-III, which has added a function to operate JVC’s video components through the video
components terminals. To use this remote control system, you need to connect the video components you want to operate, following the
diagrams below and the procedures on page 66.
• Refer also to the manuals supplied with your video components.
CONNECTIONS 1: AV COMPU LINK Connection
CAUTION:
When connecting the TV with the AV COMPU LINK
remote control system, connect the receiver to the
AV COMPU LINK EX or AV COMPU LINK-III
terminal. DO NOT connect the receiver to the AV
COMPU LINK RECEIVER/AMP terminal.
NOTES
• When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic
selection of TV’s input mode (see page 66).
• When connecting the XV-NK58SL or VCR and TV to this receiver, connect it directly to the receiver using cable with monaural mini-plugs.
CONNECTIONS 2: Video Cable Connection
This receiver is equipped with three types of the video terminals—composite video, S-video, and component video, and the signals coming into
this receiver through one type of video terminals can output only through the terminal of the same type. So you need to connect the VCR and TV
to this receiver using one of the following three ways.
• When using the AV COMPULINK remote control system, set the component video input for the DVD player and the DBS tuner correctly (see
“Setting the video component input mode—DVD VIDEO/DBS VIDEO” on page 21); otherwise, the correct input for this receiver will not be
selected on the TV.
CASE 1: When connecting the source equipment
to the receiver through the S-video
terminals, connect this receiver to the
TV’s Video Input 1 terminal using S-video
cords.
To Video Input 1
TV RX-ES1SL
S-video cord S-video cord
Source
Equipment
CASE 2: When connecting the source equipment
to the receiver through the composite
video terminals, connect this receiver to
the TV’s Video Input 2 terminal (composite
video input) using composite video
cords.
To Video Input 2
(Composite)
TV RX-ES1SL Composite
video cord
Source
Equipment Composite
video cord
CASE 3: When connecting the source equipment
to the receiver through the component
video terminals, connect this receiver to
the TV’s Video Input 2 terminals
(component video input) using
component video cords.
To Video Input 2
(Component)
TV RX-ES1SL Component
video cord
Source
Equipment Component
video cord
IMPORTANT:
The AV COMPU LINK remote control system cannot control the DBS
tuner connected to the DBS terminals.
Monaural mini-plugs
CONTINUED ON THE NEXT PAGE
Monaural mini-plugs
AV COMPU LINK
AV
COMPU LINK
TV
or
XV-NK58SL
VCR
COAXIAL
AM LOOP VOLTAGE SELECTOR ANTENNA FM 75
AM EXT
VIDEO
AUDIO
COMPONENT VIDEO
SUBWOOFER OUT
DIGITAL IN
DIGITAL 3 (TV)
DIGITAL 2 (DBS)
DIGITAL 1 (DVD)
DVD IN
DVD IN DVD IN FRONT
SURR (REAR) TV VCR DBS AV COMULINK-III IN IN IN (PLAY) OUT
(REC) RIGHT LEFT
SUB- WOOFER CENTER
R L
L
R
DBS IN MONITOR OUT
DBS IN VCR
MONITOR OUT
VIDEO OUT
(REC) IN (PLAY)
CENTER SPEAKER SURROUND
SPEAKERS
RIGHT LEFT RIGHT LEFT
FRONT SPEAKERS
CAUTION: SPEAKER IMPEDANCE 8 ~ 16
110V
127V
220V
230 -
240V
Y
PB
PR
AV
COMULINK-III
S-VIDEO
RX-ES1SL
EN65-69RX-ES1&XV-NK58[A]f 03.6.6, 11:56 65