JVC DT-V24L1 - Manual (Page 11)

11
Setting of “sub menu POSI.”
The setting values and features are as follows.
LOWER1 : Displays the current setting and adjustment bar at the lower part of the screen.
UPPER1 : Displays the current setting and adjustment bar at the upper part of the screen.
LOWER2 : Displays the current setting at the lower part of the screen.
UPPER2 : Displays the current setting at the upper part of the screen.
NOTE
The adjustment bar is not displayed for some items.
Setting of “E.AUDIO GROUP”
The setting values and selectable audio channels of EMBEDDED AUDIO are as follows.
1G : channel(s) 1/2/3/4/1+2/3+4/1 – 4 (1G)
2G : channel(s) 5/6/7/8/5+6/7+8/5 – 8 (2G)
1-2G : channel(s) 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 – 4 (1G)/5 – 8 (2G)/1 – 8 (1G+2G)
3G : channel(s) 9/10/11/12/9+10/11+12/9 – 12 (3G)
1-3G : channel(s) 1/2/3/4/5/6/7/8/9/10/11/12/1+2/3+4/5+6/7+8/9+10/11+12/1 – 4 (1G)/5 – 8 (2G)/9 – 12 (3G)/1
– 8 (1G+2G)/1 – 12 (1-3G)
Example of the level meter display —Level indication and audio channels
Ex.: When “LEVEL METER ch” is set to “12:78” and ”BAR TYPE” is set to “3COLORS.”
NOTE
• When “BAR TYPE” is set to “W.100,” the standard input level
set in the “REFERENCE LEVEL” is displayed with the line
indication. The input level set in “OVER LEVEL” is not displayed.
• The audio channel bar with no signal input is displayed in white
for “3COLORS,” and in gray for “W.100.”
Operation guide
Shows the buttons for
each operation.
NOTE
• The menu automatically disappears in about 30 seconds after the last menu operation.
• Some items may not appear on the menu depending on the input or the input signal. These items are not available.
OTHER SETTING
Setting for the “sub menu” and color system
Item To do Setting value
sub menu POSI. Select the contents and displaying position of “sub menu.” ☞ “Technical information”
COLOR SYSTEM Select the color system.
• If the picture is unstable with “AUTO,” select the appropriate
color system other than “AUTO.”
AUTO, NTSC, PAL, SECAM
AUDIO SETTING
Setting for the audio input/output
Item To do Setting value
BALANCE Adjust the balance between the right and left
speakers. L5 – L1, 0, R1 – R5
AUDIO1 ASSIGN. Select the video input which the audio signal
through AUDIO ASSIGN (IN 1) terminal is
assigned to. SDI-1* 1 , SDI-2* 1 , DVI, COMP/RGB, VIDEO-1,
VIDEO-2
AUDIO2 ASSIGN. Select the video input which the audio signal
through AUDIO ASSIGN (IN 2) terminal is
assigned to.
E.AUDIO
GROUP*
1, 2
Select the audio channel group of the
EMBEDDED AUDIO signals. ☞ “Technical information”
LEVEL METER
SETTING*
1, 2
Adjust the audio level meter display for the EMBEDDED AUDIO signals ( ☞ “Technical
information”).
LEVEL
METER ch Select the audio channels used in the audio
level meter display. OFF, 12:78 (Displays the channels 1 – 6 at the
top left of the screen and 7 – 12 at the top right.),
13:24 (Displays the odd channels at the top left
of the screen and the even channels at the top
right.)
BAR TYPE Select the color of the audio level meter display. 3COLORS (3 colors to indicate variations in
input levels), W.100 (white)
REFERENCE
LEVEL Select the standard input level. –20dB, –18dB
OVER LEVEL Select the input level’s lower limit indicated in
red for the “3COLORS” display. –10dB, –8dB, –6dB, –4dB, –2dB
BAR
BRIGHTNESS Select the brightness of the audio level meter
display. HIGH, LOW
NOTE
• When selecting “BALANCE,” the adjustment bar is displayed at the lower part of the screen.
• You cannot select the same input for both “AUDIO1 ASSIGN.” and “AUDIO2 ASSIGN.”
SYNC FUNCTION
Setting for the synchronization with signals
Item To do Setting value
NO SYNC ACTION Select the screen status when no signal is being
input. OFF, SUSPEND (suspend mode),
GRAY B.(gray screen)
DELAY TIME Select the period until the screen status
changes after signals stop coming in. 5sec., 20sec., 1min., 15min., 30min.
SYNC INPUT SEL.* 2 Select the sync signal for the VIDEO and
COMPO./RGB input. INT., EXT.
QUICK SWITCHING Select the quickness for switching the input. STD., QUICK
* 1 DT-V24L1D and DT-V20L1D only
* 2 Memorized for each input.
Technical information
OVER LEVEL REFERENCE LEVEL
Yellow
Green
Red
DT-V2420L1D_UA_R.indd 11 DT-V2420L1D_UA_R.indd 11 06.11.17 10:40:19 AM 06.11.17 10:40:19 AM