JVC LST0728-001C - Manual (Page 153)

145
1
Click [HDD Utility] under [Main Menu]
(A Page 116)
● The [HDD Utility] screen appears.
2
Click [Details]
3
Enter the [User name] and [Password] that are
configured on the NAS device for access to NAS
in [NAS User Settings], and click [Set]
4
Enter the IP address and shared name of the
NAS device in the format of A IP Address
shared name B in the [Address] field under [NAS
Drive], followed by clicking [Add]
Example)
5
If the NAS device is the only device for
recording images, deselect the [Enable
archiving to internal HDD] check box
6
Click [Close]
7
Click [Main Menu]-[Camera Record Setting]-
[Archive Setup...] (A Page 108)
● The [Archive Setup] screen appears.
8
Deselect the [Automatic path selection] check
box
9
Configure each drive as destinations for storing
images of the respective cameras.
Note :
● Performing the above setting only after the NAS device setting is
complete and when the device is connected to the network.
● If you change the archive destination after applying the setting,
playback of previously archived data will fail.
● The configurable items may differ according to the camera in
use.
● Specify the user name with a different name from the [OS
Setting] (A Page 73) host name under the user setting for NAS
connection.
Note :
● After configuring the NAS drive, an error message will appear on
the NVR Viewer for several minutes, and live images may not be
displayed during this interval.
Configuring NAS
192.168.0.200
2
3
4
5
6
[HDD Utility] Screen
8
[Archive Setup] Screen