Jensen XA4200 - Manual (Page 14)

14
XA4200, XA4300 ®
Specifications
XA Series 4-Channel Amplifiers
Frequency Response ....................................................................................... 20 Hz-20 kHz
± 0.5 dB
Signal to Noise Ratio @ Rated Power .................................................................................... >100 dB
Channel Separation @ Ref. Power ............................................................................... >65 dB, 1 kHz
THD & IMD @ Ref. Power into 2 ohms ...................................................................................... <0.8%
Speaker Impedance .............................................................................................................. 2-8 ohms
Input Impedance ................................................................................................................. 47 k ohms
Bass Boost Center Frequency ..................................................................................................... 45Hz
Crossover .................................................................................................... 12 dB/octave, Butterworth
Power Requirement ................................................................... 14.4 VDC (10.8-15.6 VDC allowable)
XA4200
Power output @ 14.4 VDC, 20-20 kHz
(4 ohms) ........................................................................ 50 Watts per channel RMS, < 0.5% THD
(2 ohms) ........................................................................ 75 Watts per channel RMS, < 0.8% THD
(4 ohms) bridged ......................................................... 150 Watts per channel RMS, < 0.8% THD
Dimensions ................................................................ 3" x 11.125" x 10" (76mm x 283mm x 254mm)
XA4300
Power output @ 14.4 VDC, 20-20 kHz
(4 ohms) .............................................................. Front: 50 Watts per channel RMS, < 0.5% THD
Rear: 100 Watts per channel RMS, < 0.5% THD
(2 ohms) .............................................................. Front: 75 Watts per channel RMS, < 0.8% THD
Rear: 150 Watts per channel RMS, < 0.8% THD
(4 ohms) bridged ............................................... Front: 150 Watts per channel RMS, < 0.8% THD
Rear: 300 Watts per channel RMS, < 0.8% THD
Dimensions ................................................................ 3" x 11.125" x 13" (76mm x 283mm x 330mm)
Specifications subject to change without notice.
5910 XA4CH_E.p65 01/23/01, 12:24 PM 14