JVC XL-R5000BK - Manual (Page 44)

39
Message Significance Remedy
CD-ROM DISC The inserted disc is a CD-ROM. Record
and erase functions are not possible. Replace with a disc recorded for audio for-
mat. (CD-DA)
DISC FULL The CD-R or CD-RW has no available
time. Replace with another recordable CD-R or
CD-RW. Finalization of the disc is recom-
mended.
TNO FULL 99 tracks have been recorded on the disc.
Further recording is not possible. Finalize the disc. Replace the disc to per-
form further recording.
CANNOT REC Recording is not possible. This may be
caused by poor connections or disc trouble. Check connections and/or replace the disc.
NO REC SOURCE No recording source has been selected. Select a recording source.
UNLOCK When performing digital recording of an
external component, the digital signal from
the component is not being sent or the sig-
nal being sent cannot be recorded by this
unit. Check the connection between the compo-
nent and this unit and confirm that the digi-
tal signal being output from the component
is compatible with this unit.
SCMS PROTECT In accordance with SCMS regulations, digi-
tal recording cannot be performed. Switch the source selection to select input
from the analog connections, and perform
analog recording.
NOT AUDIO IN The digital signal is not an audio format. Set the source component to output a digital
audio signal. For example, if a data track on
a CD is selected, switch to a track that con-
tains audio data.
NOT REC MUTE The REC MUTING button has been
pressed at a time when the function cannot
be performed. See page 19 for information on when the
muting function can be used, and press the
REC MUTING button when the function
can be performed.
SHORT REMAIN Not enough time remains on the disc to con-
tinue synchronized recording from the 3-
CD changer to the CDR. Replace the disc with a disc that contains
sufficient recording time.
CANNOT FIN Trouble with the CD-RW has prevented
finalization from being performed. Replace the disc
NO RW DISC A CD-RW has not been inserted. Erase and
unfinalize functions are not possible.
CANNOT ERASE Trouble with the CD-RW has prevented an
erase function from being performed. Replace the disc
CANNOT UNFIN Trouble with the CD-RW has prevented the
unfinalize function from being performed. Replace the disc
DAO DISC The UNFINALIZE function cannot be per-
formed with discs recorded using the
“DISC at Once” recording system.
SKIP FULL The maximum number of 21 tracks on the
disc that can be skipped has been reached.
Skip marking more than 21 tracks is not
possible with this unit.
XL-R5000.book Page 39 Wednesday, March 29, 2000 6:37 PM