JVC XL-R5000BK - Manual (Page 15)

10
Englis
h
Power ON/STANDBY Operations
To turn on the power
Press the POWER (for Canada and U.S.A.)/ (for other coun-
tries) button on the front panel or remote control.
• The currently selected function appears in the display window.
To put the power to standby
Press the POWER (for Canada and U.S.A.)/ (for other coun-
tries) button on the front panel or remote control.
• The clock display appears in the display window. It flashes if
the clock has not been set.
• The power can only be put to standby by pressing the POWER
(for Canada and U.S.A.)/ (for other countries) button press-
ing.
If the POWER (for Canada and U.S.A.)/ (for other countries)
button is pressed during recording, the standby lamp flashes while
the unit brings the operation to a stop. Once the unit has been put in
the stop mode, the unit is put in standby and the standby lamp
lights steady. During this time, there is no effect if any of the but-
tons on the front panel or remote control (including POWER (for
Canada and U.S.A.)/
(for other countries)) are pressed.
To turn on the power by pressing a function button
When the power is switched to STANDBY, it can be turned on and
a function selected simply by pressing one of the buttons shown in
the figure below
• When the 3 button for either the 3-CD changer or CDR is
pressed, the power is turned on and the corresponding tray is
selected. If a disc is loaded in the selected tray, playback begins.
If the power has been turned on, pressing
3 on the remote con-
trol selects the last selected function (3-CD changer or CDR)
and starts playback of the disc loaded in the selected tray.
• When one of the 3-CD changer
0 (eject) buttons or the CDR
EJECT 0 button is pressed, the power is turned on and the tray
opens, but the currently selected function (3-CD changer or
CDR) does not change.
• If the main power is turned off or if the AC power cord is
unplugged from the wall outlet for longer than an hour, the
internal clock, program etc. of this unit may be reset. When this
occurs, please set the clock (and timer functions) again.
Turning the power on and
putting in standby
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
MIX BALANCE
STANDBY
PHONES LEVEL
MAX MIN
MULTI JOG
+ –
POWER
REC LEVEL
1 2 3
4 5 6
7 8
10 +10
9
PLAY MODE REPEAT SET CANCEL
CONTROL
PITCH 0
PITCH +
PITCH – SHIFT
REMOTE CONTROL
RM-SXLR5000J
REC MUTING
REC
DISPLAY SYNCHRO CD REC
CD EDIT FINALIZE MENU
POWER
CD 1
CD 2
CD 3
CD CDR
CD1, CD2, CD3
POWER
(
)
POWER ( )
CD1, CD2, CD3
3
3 3
0 0
STANDBY
POWER
POWER
Lamp goes out.
Main Unit Remote Control Main Unit Remote Control
For Canada and U.S.A.
STANDBY/ON
STANDBY
Lamp goes out.
For other countries.
STANDBY
POWER
POWER
Lamp lights
Main Unit Remote Control Main Unit Remote Control
For Canada and U.S.A.
Lamp lights
For other countries.
STANDBY/ON
STANDBY
Function Operation
Main unit
Remote control CD
The function is set to CD. The
CD PLAYER indiator lights.
If one of these buttons is
pressed when a CD is on the
corresponding CD tray, con-
tinuous play starts from the
CD tray which corresponds to
the button pressed.
These buttons do not function
during program and random
play modes.
Main unit
(CD control)
CD
The function is set to CD. The
CD PLAYER indicator lights.
Main unit
(CDR control)
CDR
The function is set to CDR.
The CD RECORDER indica-
tor lights.
CD 1
CD 2
CD 3
XL-R5000.book Page 10 Wednesday, March 29, 2000 6:37 PM