JVC XL-R5000BK - Manual (Page 36)

31
2
Turn the MULTI JOG on the main unit or press
the
4 and ¢ buttons on the remote control
until “CONVERTER” appears in the display.
3
Press the SET button.
• The current setting appears in the display. (The setting is ON by
default.)
• Press the CANCEL button if you do not wish to perform this
procedure.
4
Turn the MULTI JOG on the main unit or press
the
4 and ¢ buttons on the remote control
to select “ON” or “OFF”.
• When the FS converter setting is set to “ON”, the FS converter
is used for all recording regardless of the frequency of the
source.
• When the FS converter is set to “OFF”, the FS converter is
bypassed during input of digital sampling frequencies of 44.1
kHz and during analog and multiple input recording. However,
when source sampling frequencies of 32 kHz or 48 kHz are
encountered, the FS converter is used regardless of the setting.
• Press the CANCEL button if you do not want to perform this
procedure. The setting is not changed.
5
Press the SET button.
When performing digital synchronized start recording of an exter-
nally connected digital source, synchronized start recording begins
when a digital signal is encountered in the record pause mode.
However, it is also possible to set this unit to start and stop record-
ing when you are recording a single track.
1
When the unit is in stop mode, press the MENU
button (or the DISPLAY/MENU button on the
remote control while holding down the SHIFT
button).
2
Turn the MULTI JOG on the main unit or press
the
4 and ¢ buttons on the remote control
until “D-IN SYNCHRO” appears in the display.
3
Press the SET button.
• The current setting appears in the display.
4
Turn the MULTI JOG on the main unit or press
the
4 and ¢ buttons on the remote control
to select “START” or “START&STOP”.
• When “START” is selected, only the start of the digital signal is
recorded synchronously.
• When “START&STOP” is selected, both the start and stop of
single track recroding are controlled by information in the
source digital signal.
• Press the CANCEL button if you do not want to perform this
procedure. The setting is not changed.
5
Press the SET button.
• Please note that the type of synchronized recording being per-
formed as set in the above procedure is not indicated in the dis-
play during actual recording. Even when recording is started,
only the “SYNCHRO” indicator remains lit until recording is
stopped.
• Even if this setting is set to “START&STOP”, recording is con-
cluded automatically if the source is stopped, the disc is
changed, or if a track search is performed.
Setting Up Synchronized Start
Recording for External Digital
Sources (CD, MD, and DAT only)
MIX BALANCE
STANDBY
PHONES LEVEL
MAX MIN
MULTI JOG
+ –
POWER
REC LEVEL
1 3,5 2,4
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
1 2 3
4 5 6
7 8
10 +10
9
PLAY MODE REPEAT SET CANCEL
CONTROL
PITCH 0
PITCH +
PITCH – SHIFT REC MUTING
REC
DISPLAY SYNCHRO CD REC
CD EDIT
FINALIZE MENU
POWER
CD 1
CD 2
CD 3
CD CDR
1
2,4
3,5
1
REMOTE CONTROL
RM-SXLR5000J
CANCEL
CANCEL
XL-R5000.FM Page 31 Friday, March 31, 2000 12:56 PM