JVC DLA-SH7NL - Manual (Page 47)

47
ⅷ indicates the factory default.
Item Setting Value Description
E-Mail Setting
E-Mail ON
Q OFF
For configuring the e-mail feature.
ON : Use the mail feature.
OFF : Do not use the mail feature.
E-Mail Sender ^
(Default Value: lower 3
bytes of the MAC address)
For specifying the destination e-mail address of this
projector.
E-Mail Address ^
(Default Value:
user@localhost)
For specifying the destination e-mail address.
NOTE:
● Specify an address up to a maximum of 64 characters.
● Make use of single-byte alphanumeric characters and
A-B A.B A_B A@B.
SMTP Server
Address ^
(Default Value: 1.1.1.1) For specifying the address of the outgoing mail server
(SMTP).
NOTE:
● Specify an address up to a maximum of 15 characters.
● Make use of numbers and A.B.
E-Mail Auth. ON
Q OFF
ON : Enable the e-mail authentication feature.
OFF : Disable the e-mail authentication feature.
Auth. Type Q PLAIN
LOGIN
CRAM-MD5
For configuring the e-mail authentication type.
PLAIN : Set e-mail authentication to APLAINB.
LOGIN : Set e-mail authentication to
ALOGINB.
CRAM-MD5 : Set e-mail authentication to ACRAM-
MD5
B.
Auth. User
Account ^ For configuring the account name during e-mail
authentication.
NOTE:
● Specify an address up to a maximum of 31 characters.
● Make use of single-byte alphanumeric characters and A-B.
Auth. Password ^ For configuring the password during e-mail authentication.
NOTE:
● Specify an address up to a maximum of 31 characters.
● Make use of single-byte alphanumeric characters and A-B.
Port No. Q 25
465
587
For configuring the SMTP server port number when using
the e-mail authentication feature.
Set ^ The details of the configuration will be saved.
Test Mail ^ When the ASENDB button is clicked, the test mail with the
contents configured in the E-Mail Setting will be sent.