Ip address settings (cont’d), Assigning a static ip address (cont’d) 4, Network settings – JVC DLA-SH7NL User Manual
Page 28: Enter aadvancedb in login name, Click aloginb, Set the ip address for this projector, A login screen for this projector appears, The main menu for this projector appears, Assign, Ab c
28
Assigning a static IP address
(Cont’d)
4
Enter
Ahttp://192.168.0.2B in the address field
of the Internet Explorer, and click
AGoB
● A login screen for this projector appears.
NOTE:
● When ALAN SettingB in Internet Explorer is set to AUse
a proxy server for your LAN
B it may not be possible to
designate addresses directly. Change the proxy
settings.
● If a ASecurity WarningB screen appears, click AOKB
and continue.
5
Enter
AadvancedB in Login Name
6
Click
ALOGINB
● The main menu for this projector appears.
NOTE:
● You can alter the user name and password in the
AAdmin.NetworkB menu. Specify a user name and
password of not more than eight single-byte
alphanumeric characters. (
● If you have forgotten the password, please consult
your authorized dealer.
7
Click
AAdmin.NetworkB in the main menu
8
Set the IP address for this projector
A Select
ASTATIC IPB in ADHCP ClientB
B Enter the values for
AIP AddressB, ASubnet MaskB
and
ADefault GatewayB
C Click
ASETB
NOTE:
● Access from computers may not be sucessful as this
projector’s IP address has been changed. Set and
change the computer’s IP address when accessing
this projector.
IP Address Settings
(Cont’d)
Assign
http://192.168.0.2
4
Input Your Login Name & Password
Login Name
advanced
Password
LOGIN
Main
DVI
Rate(Hz)
Pixel H
Pixel V
Link
1
60.00
2048
2400
Dual
2
3
60.00
2048
2400
Dual
4
Image
Setting
Convergence
Lens
Option
Admin.Network
Admin.E-Mail
Admin.Option
Admin.Signal
Logout
host PJ-1
user: advanced
Power
Signal Status
Warning Status
Temperature
Lamp Status Time
1
ok
10h59m
2
ok
12h3m
Lamp Information
Hide
Lamp
30.3 deg.C
Outside
30.3 deg.C
Inside
30.3 deg.C
ON
OFF
ON
OFF
Lamp Mode
Lamp1
Lamp2
Auto
Both
PROJECTION
None
Main
Image
Setting
Convergence
Lens
Option
Admin.Option
Admin.Signal
Admin.Network
Admin.Mail
Logout
host PJ-1
user: advanced
Host Name Setting
SET
Host Name
PJ
ZZZZZZ
IP Address Setting
SET
DHCP Client
DHCP
IP Address
192.168.1.100
User Login Name/Password Change
SET
Initialize
User Name
root
New Password
Confirm
New Password
Admin. Login Password Change
SET
User Name
advanced
New Password
Confirm
New Password
Subnet Mask
255.255.255.0
Default Gateway
192.168.1.1
Mac Address
01:23:45:67:89:AB
STATIC IP
A
B
C