JVC 0803-CR-JMT User Manual
Page 38

38
HV-34LH21/34LH51/34LH71/29WH21/29WH51/29WH71/29VH21 / GGT0020-001A-H / English
Troubleshooting
• When a white and bright still image
(such as a white dress) is displayed on 
the screen, the white part may look as 
if it were coloured.
It is a phenomenon unavoidable due to 
the nature of the picture tube itself, and 
not due to a TV failure.
When the picture disappears from the 
screen, the unnatural colours will also 
disappear.
• When viewing images from
commercially available video software 
products, or videos from videotapes 
which have been recorded improperly, 
the top of the image may be distorted.
This is due to the condition of the video 
signal, and not because of 
malfunction.
Poor sound
• Have you adjusted BASS or TREBLE
properly? If not, follow the description 
“Adjusting the sound” on page 25 to try 
to adjust them properly.
• When the TV channel reception is
poor, it can be hard to hear the stereo 
or bilingual sound. In this case, follow 
the description “STEREO / I•II” on 
page 25 to hear the sound more easily 
by changing it to a mono sound.
Operation disabled
• Have the batteries of the remote
control become exhausted?
Follow the description “Putting the 
batteries into the remote control” on 
page 4 and replace them with new 
batteries to try solve the problem.
• Have you attempted to use the remote
control at the sides or rear of the TV or 
at a location more than seven meters 
apart from the TV location? Operate 
the remote control in the front of your 
TV or a location less than seven 
meters from your TV to try to solve the 
problem.
• When you are viewing a teletext
programme, you cannot operate the 
menus.
Press the TV/VIDEO button to return 
the teletext programme to the ordinary 
TV programme to try operating the 
menus.
• Is the CHILD LOCK function set to
ON? If the CHILD LOCK function is set 
to ON, you cannot operate the TV with 
the front control buttons of the TV. 
Follow the description “CHILD LOCK” 
on page 27 to try to set the CHILD 
LOCK function to OFF.
• If the TV operation becomes disabled
suddenly, press the Main power button 
on the TV and turn off the main power. 
Try to press the Main power button 
again to turn on the main power. If the 
TV returns to a normal state, it is not a 
failure.
• The following functions do not operate
when receiving Progressive video 
signal (525P signal).
Remote control function: 
PIP, MULTI, FREEZE and STROBE 
button.
MENU function: 
TINT and PULL DOWN
Other concerns
• When the AUTO SHUTOFF function
operates, the TV is automatically 
turned off.
If the TV is turned off suddenly, try to 
press the POWER button to turn on 
the TV once again. At this time, if the 
TV resumes a normal state, there is no 
problem.
• If you bring a magnetized device such
as a speaker near to your TV, a picture 
may be warped or unnatural colours 
appear at the corners of the screen. In 
this case, keep the device apart from 
your TV. If the speaker causes such 
HV-34LH&29WH_Eng.book.fm Page 38 Monday, September 1, 2003 7:59 PM
