JVC 0803-CR-JMT - Manual (Page 28)

28
HV-34LH21/34LH51/34LH71/29WH21/29WH51/29WH71/29VH21 / GGT0020-001A-H / English
Using the TV’s menu
2 Press the DISPLAY button to display
“ID NO.” (ID number input screen).
3 Press the number buttons to enter the
ID number.
The lock is temporarily released so you
can view the TV channel.
If you have forgotten the ID number:
Perform step 1 of “To set this function:” on
page 27. After confirming the ID number,
press the TV/VIDEO button to exit the menu.
• When you would like to cancel the
CHANNEL GUARD function, you must
perform the operation “To set this
function” again.
„ AUTO SHUTOFF
You can set your TV to turn off if no signal is
received for about 15 minutes or longer
after the end of a broadcast.
ON:
This function is turned on.
OFF:
This function is turned off.
• The AUTO SHUTOFF function does
not turn off the TV’s main power.
• The AUTO SHUTOFF will not work for
a VIDEO mode.
„ VIDEO-3 SETTING
Set the VIDEO-3 SETTING correctly
according to the video signal input from the
external device connected to the VIDEO-3
terminal. If this setting is incorrect, images
will not be displayed.
VIDEO:
If a normal video signal (composite video
signal) is input.
COMPONENT:
If a Component video signal (Y/C
B
/C
R
signals) is input.
• For detailed connecting methods, see
“Additional preparation” on page 35.
This Television is compatible with the
Progressive video signal (525P signal)
only when the component video signal
is input.
„ PIP
[Except HV-34LH21/HV-29WH21/
HV-29VH21]
You can enter the Twin or PIP mode from
the menu without using the remote control.
This menu will be useful if you cannot find
the remote control around you.
• For detailed description of Twin and
PIP mode, see “Twin and PIP (picture
in picture) function” on page 15.
1 Choose PIP, then press the MENU/OK
button.
2 Display Twin or PIP picture as you like.
First press the 6 button to choose an
item listed, then press the MENU/OK
button. Next press the 5 button to
choose one of options, then press the
MENU/OK button.
PIP/TWIN
Each time you press the 5 button, the
screen mode changes as follows:
TWIN
→ PIP → OFF (normal screen)
SUB INPUT
Each time you press the 5 button, the
input source of the sub picture changes as
follows:
VIDEO-1
→ VIDEO-2 → VIDEO-3 →
VIDEO-4 → TV
SWAP
Each time you press the MENU/OK button,
the main picture and the sub picture will be
swapped.
• If PIP/TWIN is selected OFF, then
SUB INPUT and SWAP disappears in
PIP menu.
HV-34LH&29WH_Eng.book.fm Page 28 Monday, September 1, 2003 7:59 PM