JVC 0803-CR-JMT - Manual (Page 15)

15
HV-34LH21/34LH51/34LH71/29WH21/29WH51/29WH71/29VH21 / GGT0020-001A-H / English
Remote control buttons and functions
Using the List mode
You can store the numbers of your favorite
teletext pages in memory and call them up
quickly using the colour buttons.
To store the page numbers:
1 Press the MODE button to engage the
List mode.
The stored page numbers are displayed
at the bottom of the screen.
2 Press a colour button to choose a
position. Then press the number
buttons to enter the page number.
3 Press and hold down the (Store)
button.
The four page numbers blink white to
indicate that they are stored in memory.
To call up a stored page:
1 Press the MODE button to engage the
List mode.
2 Press a colour button to which a page
has been assigned.
To exit the List mode:
Press the MODE button again.
„ Twin and PIP (picture in
picture) function
[Except HV-34LH21/HV-29WH21/
HV-29VH21]
You can display two different pictures, the
main picture and sub picture, at a time. In
Twin mode, both pictures are equal in size.
In PIP mode, the small sub picture appears
at a corner of the screen. You can swap the
main picture and sub picture instantly. Note
that the main and sub pictures use different
input sources each other. For example, if
the main picture’s source is TV, the sub
picture’s one will be VIDEO.
While watching a normal picture, press
the PIP button.
Pressing the PIP button changes the mode
as follows:
• You can also enter this mode while in
the Multi-display mode, Freeze mode
or Strobe mode, except in the Text
mode.
To return to the normal screen:
Press the PIP button until the sub picture
disappears.
• You can hear the sound from the main
picture only.
• In the normal screen, if the current
channel is guarded with the CHANNEL
GUARD function and the screen is
blue, the PIP button does not work.
Normal screen Twin mode
PIP mode
Main
Main
Sub
Sub
HV-34LH&29WH_Eng.book.fm Page 15 Monday, September 1, 2003 7:59 PM