JVC 0303MWMMDWJEM - Manual (Page 54)

51
English
• When recording from an DVD, the current title or
chapter number does not appear on the display.
After recording, both the DVD player and the cassette
deck stop automatically.
To stop recording, press
7.
When recording from some DVDs which have their
menu
Playback may not go further from the point where the menu is
shown. (You cannot select any item on the menu during recording.)
In such a case, stop the recording and select the point where you
want to start recording as follows:
1 Start disc playback.
2 Select the item on the disc menu which you want to record.
The selected item starts playback.
3 Press
8 where you want to start recording.
4 Press REC to start recording.
When recording a disc (except DVD and MP3 disc)
• A 4-second blank is automatically made on the tape before each
track. To record without the blank, press DVD #/8 twice so
that disc playback is paused in step 1 , then go to next steps.
• When the front side of the tape ends in the middle of a track, the
recording on the reverse side starts from the beginning of that
track (if the reverse mode is set to
).
However, if the front side ends within 12 seconds from the
beginning of a track, recording on the reverse side starts from
the previous track.
Recording a Disc onto a Tape
—Disc Synchronized Recording
Available for:
DVD DVD SVCD SVCD VCD VCD Anduio CD Audio CD MP3 MP3
Using the disc synchronized recording method, you can
start and stop disc play and recording at the same time.
• During the disc synchronized recording, some operations
which would affect the recording (both audio and video)
are prohibited.
• You can use only type I tapes for recording.
• When you want to record onto both sides of a tape, you
can set the reverse mode to do so. Recording
automatically stops after recording in the
2 direction.
Therefore, make sure that the tape direction is 3 when
recording with the reverse mode on.
1
Prepare a disc.
After placing a disc, press DVD
#/8 (or DVD
SELECT
3 on the remote control), then 7 before
going to the next step.
• You can create a program (see page 37) or select the
random play mode (see page 39) as you wish.
2
Put a recordable cassette into the cassette holder.
3
Press REV. MODE to select the reverse mode.
• Each time you press the button, the reverse mode
changes as follows:
* will be shown during recording when you select
.
4
Press REC on the main unit.
Recording starts and the REC indicator starts flashing
on the display.
Ex.: An audio CD is now recorded.
Current track number
REC indicator
Elapsed playing time
TAPE
C D
REC
Ex.: A DVD is now recorded.
REC indicator
Elapsed playing time
TAPE
D V D
REC
Recording on
one side. Recording on
both sides once.
*
EN49_52UX_A7DVD[UF].pm6 03.2.26, 9:26 PM 51