JVC 0303MWMMDWJEM - Manual (Page 32)

29
English
To go to another chapter
Press 4 or ¢ during playback.
•
4: Goes back to the beginning of the current or
previous chapters.
• ¢: Skips to the beginning of the next or succeeding
chapters.
Some DVDs may not accept this operation.
To go to a particular title or chapter directly using
the number buttons
On the remote control ONLY:
• Pressing the number buttons before playback allows you
to start playing with the title number you want.
• Pressing the number buttons during playback allows you
to start playing with the chapter number of the currently
playing title you want.
Ex.: To select number 5, press 5.
To select number 10, press 10.
To select number 20, press +10, +10 then 0.
To select number 23, press +10, +10 then 3.
If a menu is shown on the TV while playing a DVD
Number buttons may be used for selecting an item in the menu.
(See page 34.)
To show the on-screen indication
You can show the following information on the TV while
playing back a DVD.
On the remote control ONLY:
To show the on-screen indication, press ON SCREEN
while playing a DVD.
• Each time you press the button, the indication on the TV
change as follows:
V D V D
Current disc information
Disc playing
information
Off
(No indication)
DVD Basic Operations
Available for: DVD DVD
• To play back a SVCD, VCD, or Audio CD, see page 30.
• To play back an MP3 disc, see page 32.
• Playback will stop when a disc menu appears on the TV
screen. If a menu appears while playing, see “Playing
Back by Using the Disc Menu” on page 34.
1
Load a disc.
• With some DVDs, playback starts automatically after
you close the disc tray by pressing DVD
0.
2
Press DVD
#/8 on the main unit (or DVD SELECT 3
on the remote control).
After reading the disc contents, playback starts from
the first chapter of the first title.
• The disc playing information appears on the display.
Current title No.
Current chapter No.
Elapsed playing time
To stop play for a moment, press DVD
#¥8 (or 8 on the
remote control).
While pausing, the elapsed playing time and the disc
indicator flash on the display.
• To start playback again, press DVD
#¥8 again (or press
DVD SELECT
3 on the remote control).
To stop playing, press 7.
• This unit can store the stop point, and when you start
playback again by pressing DVD #¥8 (or DVD
SELECT 3 on the remote control), playback starts from
the position where you have stopped—Resume play.
(“RESUME” appears on the display.)
To use Resume play, you need to turn on the Resume
function. (See page 58.)
• To stop completely when you use the Resume function,
press
7 twice.
Playback will start from the beginning of the disc.
EN27_39UX_A7DVD[UF].pm6 03.2.26, 9:25 PM 29