JVC DD-1 - Manual (Page 47)

42
Conve
n
ient
f
unc
tions
of disc
/f
ile
pla
y
ba
ck
??
AUDIO
Items Contents ( : initial setting)
DIGITAL
AUDIO
OUTPUT Select the output signal type suitable to
the device connected to the [LINE-DIGI-
TAL OUT] terminal. Refer to “List of rela-
tionships of DIGITAL AUDIO OUTPUT
preference items and output signal” on
page 43.
PCM ONLY :
Device corresponding only to linear PCM.
DOLBY DIGITAL/PCM :
Dolby Digital decoder or device having
the same function.
:
DTS/Dolby Digital decoder or device hav-
ing the same function.
DOWN MIX Select the signal suitable to the device
connected to the [LINE-DIGITAL OUT]
terminal. Set “DOWN MIX” only when
“DIGITAL AUDIO OUTPUT” is set to
“PCM ONLY”.
DOLBY SURROUND :
Dolby Pro Logic decoder-built-in device.
:
Ordinary audio device.
D (Dynamic).
RANGE
COMPRESSION To correct the difference between high
volume and low volume when playing
back with low volume (only for a DVD
recorded with Dolby Digital).
WIDE RANGE :
For enjoying the original full dynamic
range of surround sound without effects.
:
For normal usage. Surround sound is
compressed to a certain level.
HDMI
AUDIO OUT You can select whether or not the audio
signal from the [HDMI] terminal is output.
ON
:
The audio signal from the [HDMI] is out-
put.
:
The audio signal from the [HDMI] is not
output.
STREAM/PCM
STEREO
NORMAL
OFF
??
OTHERS
Items Contents ( : initial setting)
RESUME Select or OFF. (Refer to page 30.)
ON
SCREEN
GUIDE
Select or OFF. (Refer to page 30.)
DivX
REGISTRA-
TION The main unit has its own registration
code. You can confirm the registration
code, when necessary. Once you have
played back a disc/file on which the regis-
tration code is recorded, the registration
code of the main unit is overwritten for
copyright protection.
NETWORK
SETUP For DD-8/DD-3 users:
Refer to the separate volume of the oper-
ation manual for the network function.
For DD-1 users:
This item is not available.
ON
ON
DD-831[B].book Page 42 Thursday, August 24, 2006 12:05 PM