JVC DD-1 - Manual (Page 23)

18
Ba
sic ope
rat
io
ns
This function allows you to easily understand dia-
log recorded on the disc/file even with the volume
down low.
Press [CLEAR VOICE].
• Each time you press [CLEAR VOICE], the clear
voice function turns on and off.
NOTE
• This function is effective when receiving the cen-
ter channel signal with surround sound, or when
the surround mode is activated even with stereo
sound (Refer to page 36).
1
Press [BASS/TREBLE] repeatedly
to select “BASS” or “TREBLE” in
the display window.
2
Press [+] or [–] to adjust the sound
quality.
• Adjustable sound quality is from – 5 to +5.
1
Press [CH LEVEL] to repeatedly
select “SURR” (the center sur-
round speaker) or “SUBWFR” (the
subwoofer) in the display window.
2
Press [+] or [–] to adjust the vol-
ume.
NOTE
• Adjustable volume range is from
– 6 to +6.
1
Press [SETTING].
2
Press 5 or / to display “BAL: ” in
the display window.
3
Press 2 or 3 to adjust the volume
balance.
• “CENTER” (the initial setting) is displayed
when the volume of the left and right speak-
ers are the same.
• You can adjust the volume range respec-
tively for the left and right speakers. Adjust-
able volume range is from
– 21 to – 1.
Sharpening the voice sound
Adjusting the bass/treble
sound
This indicator lights up when the
clear voice function is activated.
Adjusting the volume of the
center surround speaker/
subwoofer
Adjusting the volume balance
between the left and right
speakers
DD-831[B]-04.fm Page 18 Thursday, August 3, 2006 1:57 PM