JVC KD-LX50R User Manual
Page 38
38
ENGLISH
STOP
PLAY
2
Select the operation you want to store into the Access Command.
(In this case, select “FM 89.5 MHz.”)
If you want to memorize the sound mode at the same time
Select the sound mode you want. (See page 27.)
Notes:
• Preset number (FM and AM) cannot be stored but only its station frequency is stored into the
Access Command.
• To store a DAB service into the Access Command, select a preset DAB service. (See pages 72
to 74.)
3
Press and hold VOICE until Access Command
(VOICE 14) appears on the display.
4
Press STR (ATT) to make the System ready to record
your voice.
“SPEAK” starts flashing on the display after the voice navigation “Please
speak now.”
5
Speak the word(s) you want to record while “SPEAK” is flashing
on the display. (In this example, speak “Jazz 89.”)
• If the System recognizes your word(s), “REPEAT” starts flashing on the display after
the voice navigation “Please repeat.”
• If the System does not recognize your word(s), it will ask you to speak again. In this
case, speak the word(s) again.
EN30-47.KD-LX50R[E]/f
00.3.22, 10:36 AM
38