JVC KD-LX50R - Manual (Page 29)

ENGLISH
29
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP: see page 27) to your preference and
store your own adjustments in memory.
1
Light “MODE” on the lower part of the display.
The number buttons can work as different function buttons.
REMEMBER you must finish the following steps while “MODE”
is still on the display. Otherwise, the setting will be canceled.
2
Select the sound mode you want.
For details, see page 27.
3
Select the item you want to adjust (BAS, TRE, or
BBE II ).
4
Adjust the selected item.
5
Press and hold SCM until the sound mode you have
selected flashes on the display.
Your adjustment made for the selected sound mode is stored in memory.
6
Repeat the same procedure to adjust other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 27.
1 2,5 3 4
EN25-29.KD-LX50R[E]/f 00.3.22, 10:35 AM 29