JVC TH-A10R - Manual (Page 62)

58
To change the transmittable signals for operating
another manufacturer’s VCR ——————————
1.
Press and hold VCR.
2.
Press VCR.
3.
Enter manufacturer’s code (two digits) using
buttons 1 ~ 9, and 0.
See the list on page 58 to find the code.
Examples: For a JVC product, press 0 then 1.
For a Loewe product, press 1 then 0.
4.
Release VCR.
Following button can be used for operating the VCR:
VCR :Turns on and off the VCR.
After pressing VCR or VCR CONTROL, you can perform the
following operations on the VCR:
PLAY : Starts playback.
1 : Rewinds a video tape.
¡ : Fast winds a video tape.
STOP : Stops operation.
PAUSE : Pauses.
¶ REC : Starts recording or enters recording pause.
After pressing VCR:
CHANNEL +/– : Changes the TV channels on the VCR.
1 ~ 10, 0, 100+ (+10) : Selects the TV channels.
100+ (+10) button will function as the
ENTER button if your VCR requires
pressing ENTER after selecting a channel
number.
Notes:
• Refer to the manual supplied with your VCR.
• You can use either VCR button or the VCR CONTROL
button to activate the buttons listed above. If you press VCR,
the playing source also changes. On the other hand, if you
press VCR CONTROL, the playing source does not change.
5.
Try to operate your VCR by pressing VCR.
When your VCR turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of VCR,
try each one until the correct one is entered.
Operating Other Manufacturers’ Video Equipment
TV
Manufacturer Code
JVC 01
AKAI 02
BLAUPANKT 03
FENNER 04
FISHER 05
GRUNDIG 06
HITACHI 07, 08
INNO-HIT 09
IRRADIO 02
MAGNAVOX 10
MITUBISHI 11
MIVER 03
NOKIA 12
NORDMENDE 13, 14
OKANO 09
ORION 15
PANASONIC 16, 17
PHILIPS 10
SABA 13, 18
SAMSUNG 19
SANYO 05
SCHNEIDER 02
SHARP 20
SONY 21, 22, 23, 24, 25
TELEFUNKEN 18, 26, 27
THOMSON 28
TOSHIBA 29
VCR
Manufacturer Code
JVC 01
AKAI 02
BELL+HOWELL 03
BLAUPANKT 04
CGM 03, 05
DIGTAL 05
FISHER 03
G.E. 06
GRUDIG 07
HITACHI 08, 09
LOEWE 10, 11
MAGNAVOX 04, 05
MITUBISHI 12, 13, 14, 15
NOKIA 16
NORDMENDE 17, 18, 19
ORION 20
PANASONIC 21
PHILIPS 22
PHONOLA 05
SABA 23
SAMSUNG 24, 25
SANYO 03
SHARP 26, 27
SIEMENS 07
SONY 28, 29, 30
TELEFUNKEN 31,32
TOSHIBA 33
Manufactures’ codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
TH-A10R[B]7/f 00.6.27, 0:39 PM 58