Basic adjustment items, Operating procedure, Sound adjustments – JVC RX-E12B User Manual
Page 24: On the front panel, Press adjust, Press set, Turn multi jog to adjust the selected item, Subwfr lvl front l lvl surr l lvl surr r lvl
20
Sound adjustments
Sound adjustments
You can make sound adjustment to your preference after
completing basic setting.
Basic adjustment items
You can adjust the following items. See pages in parentheses for
details.
• You cannot select the items which is not available with the
current setting.
Items
To do
SUBWFR LVL
Adjust the subwoofer output level. (21)
FRONT L LVL*
Adjust the left front speaker output level.
(21)
FRONT R LVL*
Adjust the right front speaker output level.
(21)
CENTER LVL*
Adjust the center speaker output level. (21)
SURR L LVL*
Adjust the left surround speaker output level.
(21)
SURR R LVL*
Adjust the right surround speaker output
level. (21)
EFFECT
Adjust the effect level. (21)
PANORAMA
Add “wraparound” sound effect with side-
wall image. (21)
BASS BOOST
Boost the bass level. (22)
INPUT ATT
Attenuate the input level of analogue source.
(22)
CENTER TONE
Make the center tone soft or sharp. (21)
D EQ 63Hz
Adjust the equalization pattern of each
D EQ 250Hz
band. (22)
D EQ 1kHz
D EQ 4kHz
D EQ 16kHz
SBWFR PHASE
Select the subwoofer sound phase. (22)
* If you have used Smart Surround Setup on page 14, these
settings are not required.
You can also use the remote control for sound adjustment
except for “PANORAMA,” “INPUT ATT,” and “SBWFR PHASE.”
Operating procedure
On the front panel:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
1 again.
Ex.: When adjusting subwoofer output level.
1
Press ADJUST.
MULTI JOG now works for the sound adjustment.
2
Turn MULTI JOG until the item you want to
adjust appears on the display.
• As you turn MULTI JOG, the adjustment items change as
follows:
3
Press SET.
The current setting for the selected item appears.
4
Turn MULTI JOG to adjust the selected item.
Your adjustment is stored.
5
Press SET.
6
Repeat steps
2 to 5 to adjust other items if
necessary.
EQ
LPCM
L
LS SB RS
S . WFR
PL
NEO : 6
DSP 3D
LFE
C
R
DOLBY D
DTS AAC
96 / 24
AUTO SR
C.TONE VIRTUAL SB AUDIO P. BASS
TA NEWS INFO RDS TUNED ST
SLEEP
AUTO MUTING
AUTO MODE
ATT
HP
MHz
kHz
SUBWFR LVL
FRONT L LVL
SURR L LVL
SURR R LVL
(Back to the beginning)
FRONT R LVL
CENTER LVL
EFFECT
PANORAMA
CENTER TONE
D EQ 63Hz
BASS BOOST
INPUT ATT
D EQ 250Hz
D EQ 1kHz
SBWFR PHASE
D EQ 4kHz
D EQ 16kHz
EQ
LPCM
L
LS SB RS
S . WFR
PL
NEO : 6
DSP 3D
LFE
C
R
DOLBY D
DTS AAC
96 / 24
AUTO SR
C.TONE VIRTUAL SB AUDIO P. BASS
TA NEWS INFO RDS TUNED ST
SLEEP
AUTO MUTING
AUTO MODE
ATT
HP
MHz
kHz
–10
0
+10
EQ
LPCM
L
LS SB RS
S . WFR
PL
NEO : 6
DSP 3D
LFE
C
R
DOLBY D
DTS AAC
96 / 24
AUTO SR
C.TONE VIRTUAL SB AUDIO P. BASS
TA NEWS INFO RDS TUNED ST
SLEEP
AUTO MUTING
AUTO MODE
ATT
HP
MHz
kHz
EN20-22RXE11S_12B[B]f.p65
08/12/2004, 15:00
20