JVC RX-E12B - Manual (Page 13)

9
Getting star
ted
Digital connection
Turn off all components before making connections.
This receiver is equipped with two DIGITAL IN terminals—a digital
coaxial terminal and digital optical terminal.
To reproduce the digital sound, use the digital connection in
addition to the analogue connection methods described on pages
7 to 9.
Digital coaxial cable (supplied: 1 cable)
Digital optical cable (not supplied)
2(VIDEO) 1(DVR/DVD)
DIGITAL IN
VIDEO
VIDEO
VIDEO IN
VIDEO
IN
RIGHT LEFT
Å ı
VCR , etc.
Stereo audio cable
(not supplied) Composite video
cable (not supplied)
Å To left/right audio channel output
ı To composite video output
NOTE
To view the picture, connect the TV to the receiver using the
SCART cable.
7 Connecting a video component to the VIDEO IN
jacks
You can connect a video component such as another VCR to the
VIDEO IN jacks using a composite video cable and stereo audio
cable. Such component is referred to as the source “VIDEO” in
this manual.
Connecting the power cord
When all the audio/video connections have been made, connect
the AC power plug to the wall outlet. Make sure that the plugs are
inserted firmly. The standby lamp lights in red.
CAUTIONS:
• Do not touch the power cord with wet hands.
• Do not alter, twist or pull the power cord, or put anything heavy
on it, which may cause fire, electric shock, or other accidents.
• If the cord is damaged, consult a dealer and have the power
cord replaced with a new one.
When the component has a digital coaxial output
terminal, connect it to the 1(DVR/DVD) terminal,
using a digital coaxial cable (supplied).
NOTES
• When shipped from the factory, the DIGITAL IN terminals have
been set for use with the following components:
– 1(DVR/DVD):
For DVD recorder or DVD player
– 2(VIDEO): For the component connected to the VIDEO
IN jacks
If you connect other components, change the digital input
(DIGITAL IN) terminal setting correctly. See “Setting the digital
input (DIGITAL IN) terminals—DIGITAL IN1/2” on page 19.
• Select the correct digital input mode. See “Selecting the
analogue or digital input mode” on page 10.
When the component has a digital optical output
terminal, connect it to the 2(VIDEO) terminal, using
a digital optical cable (not supplied).
Before connecting a digital
optical cable, unplug the
protective plug.
NOTES
• Keep the power cord away from the connecting cables and the
antenna. The power cord may cause noise or screen
interference.
• The preset settings such as preset channels and sound
adjustment may be erased in a few days in the following cases:
– When you unplug the power cord.
– When a power failure occurs.
Red White Yellow
EN06-09RXE11S_12B[B]f.p65 08/12/2004, 15:00 9