JVC DT-V9L1D User Manual

Page 11

ENGLISH

Setting of “E.AUDIO GROUP”

The setting values and selectable audio channels of EMBEDDED AUDIO signals are as follows.
1G: channel(s) 1/2/3/4/1+2/3+4/1 – 4 (1G)
2G: channel(s) 5/6/7/8/5+6/7+8/5 – 8 (2G)
1-2G: channel(s) 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 – 4 (1G)/5 – 8 (2G)/1 – 8 (1G+2G)
3G: channel(s) 9/10/11/12/9+10/11+12/9 – 12 (3G)
1-3G: channel(s) 1/2/3/4/5/6/7/8/9/10/11/12/1+2/3+4/5+6/7+8/9+10/11+12/1 – 4 (1G)/5 – 8 (2G)/9 – 12
(3G)/1 – 8 (1G+2G)/1 – 12 (1-3G)

Example of the level meter display —Level meter position and audio channels

Ex.: When “LEVEL METER ch” is set to “8CH” and “BAR TYPE” is set to “3COLORS.”

Operation guide
Shows the buttons for
each operation.

• The menu automatically disappears in about 30 seconds after the previous operation.
• Some items may not appear on the menu depending on the input or the input signal.
• The items controlled by the MAKE system do not appear on the menu.

AUDIO SETTING

Setting for the audio channel group of the EMBEDDED AUDIO signals and level meter

Item

To do

Setting value

E.AUDIO GROUP

Select the audio channel group of the
EMBEDDED AUDIO signals.

☞ “NOTE”

BAR POSITION

Select the type of the level meter display
— vertically or horizontally.

VERT. (vertically), HORZ. (horizontally)

LEVEL METER ch

Select the number of the audio channels
displayed on the level meter.

OFF, 12CH, 8CH

CH ARRANGE

Select the order of the audio channels
displayed on the level meter.

LINE, DIVIDE (

☞ “NOTE”)

BAR TYPE

Select the color of the level meter display.

3COLORS (3 colors to indicate variations in
input levels), W.100 (white), W.50 (half tone)

REFERENCE LEVEL Select the standard input level indicated on the

level meter.

–20dB, –18dB

OVER LEVEL

Select the input level’s lower limit indicated in
red for the “3COLORS” display.

–10dB, –8dB, –6dB, –4dB, –2dB

BAR BRIGHTNESS

Select the brightness of the level meter.

LOW, HIGH

SYNC FUNCTION

Setting for the monitor performance when no signal comes in

Item

To do

Setting value

NO SYNC ACTION

Select the screen status when no signal is
coming in.

OFF,
P.SAVE (power save mode),
GRAY B. (gray screen)

DELAY TIME

Select the period until the screen status
changes as selected in “NO SYNC ACTION”
after signals stop coming in.

30sec., 5min., 15min.

• Setting “NO SYNC ACTION” to “GRAY B.” saves the power consumption of the back light by half. (The screen

color changes to gray.)
Selecting “P.SAVE” saves more power consumption by turning off the back light.

OVER LEVEL

REFERENCE LEVEL

OVER LEVEL

REFERENCE LEVEL

OVER LEVEL

REFERENCE LEVEL

Yellow

Green

Red

Yellow

Green

Red

• When “CH ARRANGE” is set

to “DIVIDE,” a odd channel is
displayed on the left and an
even channel is displayed on the
right.

• When “BAR TYPE” is set

to “W.100” or “W.50,” the
standard input level set in
the “REFERENCE LEVEL” is
displayed with the line indication.
The input level set in “OVER
LEVEL” is not displayed.

• The level meter with no signal

input is displayed in white for
“3COLORS,” and in gray for
“W.100” or “W.50.”

Ex.: BAR POSITION: HORZ.,
CH ARRANGE: LINE

Ex.: BAR POSITION: HORZ.,
CH ARRANGE: DIVIDE

Ex.: BAR POSITION: VERT.,
CH ARRANGE: LINE

Ex.: BAR POSITION: VERT.,
CH ARRANGE: DIVIDE

OVER LEVEL

REFERENCE LEVEL

Yellow

Green

Red

Yellow

Green

Red

NOTE

DT-V9L1D_EA_EN_R.indd 11

07.9.14 6:19:25 PM