beautypg.com

Dubbing (cont.) – JVC GR-D201 User Manual

Page 54

background image

54

EN

Master Page: Left

It is also possible to copy recorded scenes from
another video unit equipped with a DV connector
onto the camcorder. Since a digital signal is sent,
there is little if any image or sound deterioration.

1

Make sure all units are turned off.

2

Connect this camcorder to a video unit equipped
with a DV output connector using a DV cable as
shown in the illustration.

3

Set this camcorder’s VIDEO/MEMORY Switch to
“VIDEO”.

4

Set this camcorder’s Power Switch to “PLAY”
while pressing down the Lock Button located on
the switch.

5

Set “REC MODE” to “SP” or “LP”. (

੬ pg. 31, 34)

6

Turn on the video unit’s power.

7

Insert the source cassette in the video unit.

8

Insert the recording cassette in this camcorder.

9

Press the Recording Start/Stop Button to engage
the Record-Pause mode.

● The “

” indication appears on the screen.

10

Press the Recording Start/Stop Button to start

recording.

● The

indication rotates.

11

Press the Recording Start/Stop Button again to

engage the Record-Pause mode.

● The

indication stops rotating.

12

Repeat steps 10 11 for additional editing.

Stop the video unit and camcorder.

NOTES:

It is recommended to use the AC Adapter as the

power supply instead of the battery pack.
(

pg. 11)

If no image is displayed on the LCD monitor, set

“S/AV INPUT” to “OFF”. (

pg. 31, 40)

If the remote control is used when both the player

and recorder are JVC video units, both units will
perform the same operation. To prevent this from
happening, press the buttons on both units.

If a blank portion or disturbed image is played

back on the player during dubbing, the dubbing
may stop so that an unusual image is not dubbed.

Even though the DV cable is connected correctly,

sometimes the image may not appear in step 9. If
this occurs, turn off the power and make
connections again.

Digital Dubbing is performed in the sound mode

recorded on the original tape, regardless of the
current “SOUND MODE” setting. (

pg. 34)

When using a DV cable, be sure to use the

optional JVC VC-VDV204U DV cable.

Dubbing From A Video Unit
Equipped With A DV OUT
Connector (Digital Dubbing)

Core filter

To DV

DV cable

(optional)

Video unit equipped with DV

connector

To DV OUT

DV. IN

DUBBING (cont.)

GR-D200PAL.book Page 54 Monday, June 30, 2003 6:10 PM