JVC GR-D201 - Manual (Page 32)

32
EN
Master Page: Left-Heading0X2
4
Press SELECT/SET. The Menu Screen returns.
● Repeat the procedure if you wish to set other
function menus.
5
Press SELECT/SET again. The Menu Screen
closes.
NOTES:
● The “m CAMERA” settings are effective when the
Power Switch is set to both “A” and “M”.
However, the menu settings can be changed only
when the Power Switch is set to “M”.
● The “q MANUAL” settings are effective only
when the Power Switch is set to “M”.
● The “s SYSTEM” functions which are set when
the Power Switch is set to “M” are also applied
when the Power Switch is set to “PLAY”.
● The “n” (CAMERA DISPLAY) settings are
effective even when the Power Switch is set to
“A”. However, the menu settings can be changed
only when the Power Switch is set to “M”.
● The “n” (CAMERA DISPLAY) settings are
effective only for shooting.
● The “n” (VIDEO DISPLAY) settings are effective
only for video playback.
● The date indication can also be turned on/off by
pressing the DISPLAY Button on the remote
control (provided). (
੬ pg. 22, 52, 62)
RECORDING MENUS
IMPORTANT:
Some Wipe/Fader Effects cannot be used with
certain modes of Program AE with special effects.
(
੬ pg. 33) If an unusable Wipe/Fader Effect is
selected, its indicator blinks in blue or goes out.
These effects let you make pro-style scene
transitions. Use them to spice up the transition from
one scene to the next.
Wipe or Fader works when video recording is
started or stopped.
1
Set the VIDEO/MEMORY Switch to “VIDEO”.
2
Set the Power Switch to “M” while pressing
down the Lock Button located on the switch.
3
Open the LCD monitor fully, or pull out the
viewfinder fully.
4
Set “v WIPE/FADER” to the desired mode.
(
੬ pg. 31)
● The selected effect indicator appears.
5
Press the Recording Start/Stop Button to activate
the Fade-in/out or Wipe-in/out.
To deactivate the selected effect…
Select “OFF” in step 4.
NOTES:
● You can select other effects for “WIPE/FADER”
during recording.
● You can extend the length of a Wipe or Fader by
pressing and holding the Recording Start/Stop
Button.
WIPE/FADER
(Factory-preset: OFF)
OFF: Disables effects.
FADER–WHITE: Fade in or out with a white
screen.
FADER–BLACK: Fade in or out with a black
screen.
FADER–B.W: Fade in to a colour screen from
a black and white screen, or fade out from colour to
black and white.
Wipe Or Fader Effects
GR-D200PAL.book Page 32 Monday, June 30, 2003 6:10 PM