JVC GR-D201 - Manual (Page 24)

Master Page: Left-start
24
EN D.S.C. PLAYBACK
Images shot with the camcorder are automatically
numbered, then stored in numerical order in the
memory card. You can view the stored images, one
at a time, much like flipping through a photo album.
1
Load a memory card. ( ੬ pg. 16)
2
Set the VIDEO/MEMORY Switch to “MEMORY”.
3
Set the Power Switch to “PLAY” while pressing
down the Lock Button located on the switch.
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
● The type of file (IMAGE or E-MAIL CLIP) which
has been played back at the last time is
displayed.
5
If the video clip playback (E-MAIL CLIP,
੬ pg. 25) screen appears, press SELECT/SET.
The MEMORY SELECT screen appears.
6
Press + or – to select “IMAGE”, and press
SELECT/SET. The image playback screen
(IMAGE) appears.
7
Press REW (3) to display the previous file.
Press FF (5) to display the next file.
● Pressing INFO gives you details on the
displayed file. ( ੬ pg. 26)
● You can also look for the desired file using
Index Screen. ( ੬ pg. 26)
● You can turn off the on-screen playback
display. ( ੬ pg. 26)
NOTES:
● Even if you shoot a new image after playing back a
low-numbered one, this will not overwrite an
existing image, because new images are
automatically stored after the last-recorded one.
● Images shot in a file size other than “640 x 480”,
“1024 x 768”, “1280 x 960” and “1600 x 1200”
with another devices will be displayed thumbnail
images. These thumbnail images cannot be
transferred to a PC.
● Images shot with devices (such as JVC GR-
DVM70) that are not compatible with DCF cannot
be viewed with this camcorder; “UNSUPPORTED
FILE!” will be displayed.
Playback Zoom
Available only with the remote control (provided).
(
੬ pg. 58)
Normal Playback Of Images
Power Switch
Lock Button
Stop Button
(STOP (8))
INFO Button
Play/Pause Button
(PLAY (4/9))
Fast-Forward
Button (FF (5))
Rewind Button
(REW (3))
VIDEO/MEMORY
Switch
SELECT/SET Button
+/- Button
GR-D200PAL.book Page 24 Monday, June 30, 2003 6:10 PM