Auto playback of images, Playback of video clips – JVC GR-D201 User Manual
Page 25
EN
25
Master Page: Right
You can run through all the images stored in
memory card automatically.
1
Perform steps 1 – 6 in “Normal Playback Of
Images”.
2
Press PLAY (4/9) to start Auto Playback.
● If you press REW (3) during Auto Playback,
files are displayed in descending order.
● If you press FF (5) during Auto Playback,
files are displayed in ascending order.
3
To end Auto Playback, press STOP (8).
You can view video clips (
੬ pg. 50) stored in the
memory card.
1
Load a memory card. (
੬ pg. 16)
2
Set the VIDEO/MEMORY Switch to “MEMORY”.
3
Set the Power Switch to “PLAY” while pressing
down the Lock Button located on the switch.
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
● The type of file (IMAGE or E-MAIL CLIP) which
has been played back at the last time is
displayed.
5
If the image playback (IMAGE) screen appears,
press SELECT/SET. The MEMORY SELECT screen
appears.
6
Press + or – to select
“E-MAIL CLIP”, and press
SELECT/SET. The video
clip playback screen
(E-MAIL CLIP) appears.
7
Press REW (3) to select
the previous file. Press FF
(5) to select the next file.
● Pressing INFO gives you details on the
displayed file. (
੬ pg. 26)
● You can also look for the desired file using
Index Screen. (
੬ pg. 26)
8
To start playback, press PLAY (4/9).
9
To stop playback, press STOP (8).
Auto Playback Of Images
[For Normal Playback]
To display the next image
[For Auto Playback]
Image playback screen (IMAGE)
To display the previous image
100-0013
100-0014
100-0015
100-0016
Playback Of Video Clips
E - M A I L C L I P
DIG
IT
A
L S
TILL
CA
MERA
(D.S
.C.)
GR-D200PAL.book Page 25 Monday, June 30, 2003 6:10 PM