JVC DR-MX10SEK - Manual (Page 78)

H EN 78
Dubbing from VHS to HDD
or DVD (1 Programme)
A
Load the tape to play.
0 When dubbing to a DVD disc, load a recordable
disc.
B
Select “VHS N HDD ” or “VHS N
DVD ” in step B
of “Dubbing between
HDD and DVD Deck ”, then select “1
PROG. ”. [ P72]
C
Set the recording mode.
A Select the recording mode.
B
Select ACONFIRMB.
0 See ARecording ModeB [ P92]
D
Pause playback at the scene that you
wish to dub.
0 Locate the recording start point with O/N,
then pause playback.
E
Select “EXECUTE”.
If the index signal (VISS) of the VHS is
detected, dubbing ends, and the
broadcast screen appears automatically
after a message is displayed.
To cancel a dubbing that is in progress
A Press STOP/CLEAR ( o).
B
Select ACANCELB, then press ENTER.
ABCDEF GHIL M
9 Dubbing only one of the programmes
recorded on a VHS tape to the HDD or a
DVD disc is possible.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NOTES:
0 When the HDD or DVD disc runs out of disc
remaining time, the tape will automatically stop at
that position and dubbing will cease.
If dubbing to DVD-RW/-R (Video mode)
0 For discs in Video mode, switching of audio during
playback is not possible.
Set to AMAINB or ASUBB in the Setup menu
[ P111] N.
STOP
CANCEL
B
,
C
,
E
D
SELECT
CONFIRM
SP
CONFIRM
SELECT
CONFIRM
SELECT
CONFIRM
EXECUTE
DR-MX10SE.book Page 78 Wednesday, December 14, 2005 3:37 PM