JVC DR-MX10SEK - Manual (Page 48)

H EN 48
Manual Timer
Programming
(The GUIDE Plus+ System)
A
Access the GUIDE Plus+ system.
0 The AGridB area screen will be displayed.
B
Select “Schedule”.
C
Select “Manual”.
D
Set timer recording.
A
Set the recording date.
0 Press the Selection Keys (DE) to select, and
(FG) to change.
0 Can also be entered using the Number Keys.
0 Press the Action (GREEN) button for
confirmation.
B Set the recording start time.
C
Set the recording end time.
D Set the recording channel.
0 Can also be set from the channel (mosaic)
screen.
E Set a name for the timer programme
settings.
0 The Virtual Keyboard screen will be displayed.
0 To change the character set, press the Action
(YELLOW) button.
ABCDEF GHILM
9 Timer programming can be done by
specifying the date, time and channel as
manual programming settings on the
GUIDE Plus+ system screen.
9 You can programme a maximum of 16
programmes up to 7 days in advance,
including other programmes, within 1
month.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PREPARATION:
0 Load a recordable disc when recording to a DVD
disc. [ P12]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT:
0 Timer programming on the VHS is not possible.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CAUTION:
0 In step D , you can press the Action (RED) button to
return to a previous screen. However, the timer
programme settings will be erased if you return to the
initial AScheduleB screen. Confirm one at a time then
press the button.
STANDBY/ON
A
,
E
B
,
D
C
,
D
Action
(GREEN)
Action
(YELLOW)
Action
(RED)
Number
Keys
F
SELECT
Schedule
Manual
SELECT
Next
05 - Jun
SELECT
CONFIRM
Next
Cursor movement,
backspace & space entry
DR-MX10SE.book Page 48 Wednesday, December 14, 2005 3:37 PM