Pr.12, Basic oper ations, Start recording – JVC DR-MX10SEK User Manual
Page 39: End recording, Possible operations during recording, Direct rec

Basic Oper
ations
EN
I
39
B
Select the recording mode.
0
Usually select SP (standard) mode.
0
The recording mode changes each time REC
MODE/REMAIN is pressed.
0
Pressing the Selection Keys (FG) also changes
it.
0
See ARecording ModeB [ P92].
0
Recordable time for each recording mode.
The shorter the recordable time, the higher the
image quality.
C
Confirm.
D
Start recording.
0
When operating from the unit, press REC.
E
End recording.
0
In the case of DVD disc, APLEASE WAITB is
displayed. Do not turn off the unit while it is
being displayed.
Recording mode
DVD
HDD
DV
-
11 hours
XP
1 hour
34 hours
SP
2 hours
69 hours
LP
4 hours
138 hours
EP
6 hours
209 hours
FR480
8 hours
300 hours
(The numbers shown are estimates.)
CONFIRM
WHILE HOLDING
PR.12
1:35
REC MARK
SUPERIMPOSE
PRESS TWICE
Possible operations during recording
Ⅲ
To pause
0
The pause function for HDD is possible only
during external input (L-1/L-2/F-1/dv)
recording.
Ⅲ
To resume recording
Ⅲ
To specify recording stop time (Instant
Timer Recording)
0
The recording time from the current time can
be set.
0
The disc mark on the front display panel
blinks.
0
The recording end time switches each time
REC (R) on the unit is pressed.
•
A maximum of up to 6 hours can be set in
30-minute intervals.
•
To cancel, press the button a few times until
the set time is cleared.
DIRECT REC
If the following setting is enabled, the channel
showing on the TV can be recorded instantly.
Setup Menu
ADIRECT RECB = AONB
[
P112] X
0
This function is possible if connected using a
T-V Link compatible TV and SCART cable.
0
A--B is displayed on the front display panel
during recording.
WHILE HOLDING
WHILE HOLDING
Unit’s record button
ITR
2 : 30
F-1
VD
EO
VIDEO (MONO)L
REC
PR
−AUDIO−R
Display on bottom right
screen
WHILE HOLDING
While watching on TV
DR-MX10SE.book Page 39 Wednesday, December 14, 2005 3:37 PM