JVC 0797TOV*UN*SN - Manual (Page 63)

EN
63
3 PLAY BACK DUBBED SCENE
•If any images from the scene prior to the
transition you chose for your Edit-In point
were recorded, that means your VCR moves
quickly from Record-Pause to Record mode.
•If the scene you tried to dub starts in
progress, the VCR is slow to start recording.
CONTINUED ON NEXT PAGE
For More Accurate Editing
Some VCRs make the transition from Record-Standby to Record mode faster than others. Even if you begin
editing for the camcorder and the VCR at exactly the same time, you may lose scenes you wanted, or find
that you’ve recorded scenes you didn’t want. For a cleanly edited tape, confirm and adjust the timing of the
camcorder against your VCR.
Diagnosing VCR’s against Camcorder Timing
1 PREPARE FOR R.A. EDIT
Play back the tape in the camcorder, then point
the remote control at the camcorder's remote
sensor and press R.A. EDIT ON/OFF.
•“Random Assemble Editing Menu” appears
on the TV screen.
2 CHOOSE A SCENE
Perform Random Assemble Editing on Program
1 only. In order to check VCR and camcorder
timing, select the beginning of a scene
transition as your Edit-In point.
T W
1 – – – – : – – ~
2 ~
3 ~
4 ~
5 ~
6 ~
7 ~
8 ~
TIME CODE
IN OUT MODE
– – : – –
0 0 : 0 0
TOTAL
Random Assemble Editing Menu
VCR (Recording deck)
R.A.EDIT ON/OFF
Program 1
RM-V711U
(provided)
Remote sensor