JVC 0797TOV*UN*SN - Manual (Page 57)

EN
57
3
1 CONNECT DOCKING STATION TO
TV OR VCR
Connect as shown in the illustration 1 , 2 or 3
(
੬
pg. 56, 57).
If Using A VCR . . . go to step 2.
If not . . . go to step 3.
2 CONNECT VCR OUTPUT TO TV
INPUT
Refer to your VCR’s instruction manual.
3 TURN ON POWER
4 SELECT TV’S VIDEO MODE
Set the TV to the channel or mode appropriate
for video playback.
Red
White
Yellow
Red
Yellow
White
Connection to a TV or VCR
equipped with an S-VIDEO
IN and/or A/V input (RCA
type) connectors
AC Power Adapter/Charger
VCR
NOTES:
● When using the provided VIDEO/AUDIO cable
(Docking Station to TV or VCR), DC cord, S-
VIDEO cable or editing cable, make sure you
connect the end of the cable with the core filter to
the Docking Station. The core filter improves
performance of equipment.
● If TV/VCR is equipped with only one audio
connector, use a conversion plug (commercially
available).
● Set the VIDEO OUT select switch of the cable
adapter as required:
Y/C: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-VIDEO cable.
CVBS: When connecting to a TV or VCR which
does not accept Y/C signals and uses an audio/
video cable.
To DC
output jack
To DC
input jack
DC cord
Core filter
To VIDEO
input jack
(connect when the S-VIDEO cable is not used) To VIDEO output jack
VIDEO/
AUDIO cable
(provided)
To AUDIO
output jacks (L/R)
To AUDIO input jacks (L/R)
To S-VIDEO input jack
S-VIDEO cable (provided)
Core filter
To S-VIDEO
output jack
Core filter
To
TV or VCR