JVC GR-DVL610SH User Manual
Page 49
EN
49
: Factory-preset
NOTES:
● “
SYSTEM” and “
DISPLAY” functions which are set when the Power Switch is set to “
” are also
applied when the Power Switch is set to “
” (
੬
pg. 50). “CLOCK ADJ.” only appears when the Power
Switch is set to “
”.
● The “
DISPLAY” settings are effective even when the Power Switch is set to “
”.
● The “ON SCREEN” setting can also be changed by pressing the DISPLAY Button on the remote control
(provided) (
੬
pg. 23, 52, 62).
(GR-DVL810A/DVL710A/DVL610A/DVL610SH only)
Allows you to set the Picture Quality mode (FINE and STANDARD) depending on your
preference (
੬
pg. 14).
When Snapshot recording is performed with the VIDEO/DSC Switch set to
“VIDEO”, still images are recorded only onto the tape.
When Snapshot recording is performed with the VIDEO/DSC Switch set to
“VIDEO”, still images are recorded not only onto the tape but also in the
memory card.
/
Automatic demonstration will not take place.
Demonstrates certain functions such as Programme AE with special effects,
etc., and can be used to confirm how these functions operate. When “DEMO
MODE” is set to “ON” and the Menu Screen is closed, demonstration starts.
Performing any operation during the demonstration stops the demonstration
temporarily. If no operation is performed for more than 1 minute after that,
the demonstration will resume.
NOTES:
● If a tape is in the camcorder, the demonstration cannot be turned on.
● “DEMO MODE” remains “ON” even if the camcorder power is turned off.
● If “DEMO MODE” remains “ON”, some functions will not be available.
After viewing demo, set to “OFF”.
Does not reset all settings to the factory-preset.
Resets all settings to the factory-preset.
Keeps the camcorder’s display (except the date, time and time code) from
appearing on the connected TV screen.
Makes the camcorder’s display appear on screen when the camcorder is
connected to a TV.
The date/time does not appear.
Displays the date/time for approx. 5 seconds in the following cases:
•When the Power Switch is set from “OFF” to “
” or “
”.
•When video playback starts. The camcorder displays the date/time when
scenes are recorded.
•When the date is changed during video playback.
The date/time is always displayed.
Time code is not displayed.
Time code is displayed on the camcorder and on the connected TV. Frame
numbers are not displayed during recording.
Allows you to set the current date and time (
੬
pg. 11).
DSC
DISPLA
Y
DEMO
MODE
CAM
RESET
ON
SCREEN
DATE/
TIME
TIME
CODE
QUALITY
REC
SELECT
CLOCK ADJ.
OFF
ON
CANCEL
EXECUTE
LCD
LCD/TV
OFF
AUTO
ON
OFF
ON
SYSTEM