JVC GR-DVL610SH - Manual (Page 14)

14
EN
Memory card
Card Cover
Clipped edge
Label
GETTING STARTED (cont.)
Picture Quality Mode Setting
(GR-DVL810A/DVL710A/DVL610A/DVL610SH only)
The Picture Quality mode can be selected to best
match your needs. Two Picture Quality modes are
available: FINE and STANDARD (in order of quality).
1 Set the Power Switch to “ ” while pressing
down the Lock Button located on the switch. The
power lamp lights and the camcorder turns on.
2
Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3
Rotate the MENU/BRIGHT wheel to select “
DSC” and press it. The DSC Menu appears.
4
Rotate the MENU/BRIGHT wheel to select
“QUALITY” and press it. The Sub Menu
appears. Rotate the MENU/BRIGHT wheel to
select the desired mode and press it.
5
Rotate the MENU/BRIGHT wheel to select
“ RETURN”, and press it twice. The Menu
Screen closes.
Picture Quality Mode
FINE
100
200
400
800
Memory Card
8 MB (provided)
16 MB (optional)
32 MB (optional)
64 MB (optional)
Approximate Number of Storable Images
STANDARD
200
400
800
1600
ATTENTION:
Do not insert/remove the memory card while the
camcorder is turned on, as this may cause the
memory card to be corrupted or cause the
camcorder to become unable to recognize
whether or not the card is installed.
Loading A Memory Card
(GR-DVL810A/DVL710A/DVL610A/DVL610SH only)
The provided memory card is already inserted in the
camcorder when you receive the camcorder.
1
Make sure the camcorder’s power is off.
2
Open the card cover (MEMORY CARD).
3
Insert the memory card clipped edge first.
•Do not touch the terminal on the reverse side
of the label.
4 To close the card cover, push it until you hear a
click.
To Unload A Memory Card . . .
.... in step 3 push the memory card, which then
comes out of the camcorder automatically. Pull it
out and close the card cover.
NOTES:
● Be sure to use only SD Memory Cards marked
“ ” or MultiMediaCards marked
“ ”.
● Some brands of memory cards are not compatible
with this camcorder. Before purchasing a memory
card , consult its manufacturer or dealer.
● Before using a new memory card, it is necessary to
FORMAT the card.
੬
pg. 36.
N RETUR
UXGA
AUTO
GA V
S I ZE
–
–
TY QUAL I
STANDARD –
– F I NE
Display
MENU/BRIGHT Wheel
Power Switch
Lock Button
Power Lamp
NOTE:
The number of storable images depends on the
selected picture quality as well as the composition of
the subjects in the images and the type of memory
card being used.