For recording, Programme ae with special effects, Night-scope – JVC GR-DVL610SH User Manual
Page 38
38
EN
I C F I LM
CLASS
SEP I A
GHT
TW I L I
ONE
MONOT
SNOW
S
SPORT
G
I HT
SPOT L
E
STROB
4
SL
X
OW
10
SL
X
OW
ER
SHUT T
1/120
FOR RECORDING
NIGHT-SCOPE Button
Power Switch
IMPORTANT:
Some modes of Programme AE with special effects
cannot be used with certain Fade/Wipe Effects
(
੬
pg. 40, 41). If an unusable mode is selected, its
indicator blinks or goes out.
Lock Button
P.AE Button
Programme AE With Special Effects
1
Set the Power Switch to “
” while pressing down
the Lock Button located on the switch.
2
Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3
Rotate the MENU/BRIGHT wheel to select “
PROGRAM AE”, then press it.
4
Rotate the MENU/BRIGHT wheel to select the
desired mode (
੬
pg. 39), then press it. Selection is
complete. Press the MENU/BRIGHT wheel in again.
The Menu Screen closes.
5
Press P.AE so that the selected effect indicator
appears.
To Deactivate The Selected Mode . . .
.... press P.AE again so that the effect indicator disappears.
NOTES:
● Programme AE with special effects can be changed
during recording or during Record-Standby.
● Some modes of Programme AE special effects cannot be
used during Night-Scope.
MENU/BRIGHT Wheel
Display
Night-Scope
Makes dark subjects or areas even brighter than they
would be under good natural lighting. Although the
recorded image is not grainy, it may look as if it is strobing
due to the slow shutter speed.
1
Set the Power Switch to “
” while pressing down
the Lock Button located on the switch.
2
Press NIGHT-SCOPE so that the Night-Scope
indicator “
”appears.
•The shutter speed is automatically adjusted to
provide up to 30 times sensitivity.
•“A” appears beside “
” while the shutter speed is
being automatically adjusted.
To Deactivate Night-Scope . . .
.... press NIGHT-SCOPE again so that the Night-Scope
indicator disappears.
GR-DVL810A/DVL710A/
DVL610A/DVL610SH only
NOTES:
● During Night-Scope, the following functions
or settings cannot be activated and its
indicator blinks or goes out:
•
Some modes of “Programme AE With
Special Effects” (
੬
pg. 38, 39), “Picture
Wipe/Dissolve” (
੬
pg. 40, 41).
•
“GAIN UP” in the CAMERA Menu
(
੬
pg. 47).
•
“DIS” in the MANUAL Menu (
੬
pg. 47).
•
“Video light” when LIGHT OFF/AUTO/ON
is set to “AUTO” (
੬
pg. 19).
● During Night-Scope, it may be difficult to
bring the camcorder into focus. To prevent
this, use of a tripod is recommended.