JVC GR-DVL610SH - Manual (Page 36)

36
EN
D.S.C. PLAYBACK (cont.)
FO MAT R
FO MAT R
EX ST I NG I
ERASE
DATA?
AL L
EXECUTE
– CANCEL
T PROTEC
I NDEX
DELE E T
DPOF
AT FORM
N RETUR
CANCEL
EXECUTE
Lock Button
Power Switch
Display
Initialising A Memory Card
You can initialise a memory card anytime.
After initialising, all images and data stored in the
memory card, including those which have been
protected, are cleared.
1
Set the VIDEO/DSC Switch to “ ”, then set the
Power Switch to “ ” while pressing down the
Lock Button.
•A stored image is displayed.
2
Press the MENU/BRIGHT wheel in. The Menu
Screen appears. Rotate the MENU/BRIGHT wheel to
select “
MEMORY” and press it. The MEMORY
Menu appears.
3 Rotate the MENU/BRIGHT wheel to select
“FORMAT” and press it. The Confirmation Screen
appears.
4
Rotate the MENU/BRIGHT wheel to select
“EXECUTE” and press it. The memory card is
initialised. When initialisation is finished, “NO
IMAGES STORED” appears.
•To cancel initialisation, rotate the MENU/BRIGHT
wheel to select “CANCEL” and press it.
CAUTION:
Do not perform any other operation (such as turning
off the camcorder) during initialisation. Also, be sure
to use the provided AC Adapter, as the memory card
may be corrupted if the battery becomes exhausted
during initialisation. If the memory card becomes
corrupted initialise it.
Menu Screen
MENU/BRIGHT Wheel
VIDEO/DSC Switch (Open the
LCD monitor to access this switch)