JVC HR-E939EG - Manual (Page 25)

EN
25
ACCESS SHOWVIEW
PROGRAM SCREEN
3
Press OK, and the
ShowView Program screen
appears (if you’re just
starting out, “P1” appears).
● If the number you
entered is invalid,
“ERROR” appears. Press
CANCEL and input a
valid ShowView number.
The front display panel looks like this:
● If you are using the Illumi-Guide feature, OK blinks.
● If you’re not receiving PDC/VPS, press NUMBER key
“7” to set to "OFF" (
੬
pg. 28).
SET TAPE SPEED
4
Press SP/LP to set the tape speed.
RETURN TO NORMAL
SCREEN
5
Press OK.
● Repeat steps 1–5 for each additional programme.
ENGAGE RECORDER’S
TIMER MODE
6
Press TIMER.
NOTE:
For safety, your recorder disables all other functions while in the
Timer mode. If you want to use the recorder but its Timer mode
is engaged, press TIMER and all other functions are operable.
To re-engage the timer, press TIMER.
To Delay The Stop Time . . .
. . . press ADD TIME (NUMBER Key "5") after pressing OK in
step 3. Each time you press, the Stop time is delayed by 5
minutes (meaning that 5 minutes of recording time is added).
You can easily compensate for anticipated programme schedule
delays this way.
To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (NUMBER key
“9”) for weekly serials or DAILY (NUMBER key “8”) for daily
serials (Monday–Friday).
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen and "FULL" appears
on the front display panel. To record the extra programme, you
must first cancel any unnecessary programmes (
੬
pg. 28).
8
• •
• • • • • •
• • • • •
• • • • • •
• • •
1 2
4 5
3
6
8
0
7 9
2
1
3 OK
WEEKLY
TIMER
ADD TIME
– P1 –
SHOWVIEW 12345678
START STOP
21 : 00 = 22 : 00
SP ON
DATE TV PROG
25. 12 1
ARD
:OK
SP
SP/LP
TIMER
SP/LP
DAILY
CANCEL
:PDC/VPS