Showview timer recording, Access timer program- ming screen, Enter showview number – JVC HR-E939EG User Manual
Page 24: Timer recording(cont.)
24
EN
TIMER RECORDING(cont.)
ShowView
Timer
Recording
Before performing ShowView timer recording:
● Be sure to read "Information On ShowView" (
੬
pg. 22).
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Turn on the TV and select the VIDEO channel (or AV mode).
TIMER PROGRAMMING
[0 – 9] : SHOWVIEW
[+/-] : EXPRESS PROGRAMING
[CANCEL] : EXIT
ACCESS TIMER PROGRAM-
MING SCREEN
1
Press PROG.
The front display panel looks like this:
● If you are using the Illumi-Guide feature, the following
buttons will light up: NUMBER keys (0–9), START +/–,
STOP +/–, DATE +/–, TV PROG. +/–, and CANCEL.
ENTER SHOWVIEW
NUMBER
2
Press the NUMBER keys to
enter the ShowView
number of a programme
you wish to record.
● If you make a mistake,
press CANCEL and then
input the correct number.
The ShowView number
you enter appears on the front display panel:
● If you are using the Illumi-Guide feature, OK blinks
when the following buttons are lit: NUMBER keys (0–
9) and CANCEL.
During ShowView and regular timer programming, the Illumi-
Guide feature tells you which button on the remote control
must be pressed next by lighting it up. To use this feature, press
ILLUMI GUIDE before performing step 1. (PROG., REW, PLAY,
FF light up at this time.)
If you aren't going to use the Illumi-Guide feature, go directly to
step 1.
SHOWVIEW
1 2 3 4 5 6 7 8 5
[0 – 9]
=
When Using The Illumi-Guide Feature
● Buttons light or blink on the remote control for
approximately 10 seconds. If the button or buttons extinguish
during timer programming, press ILLUMI GUIDE and the
button or buttons previously lit or blinking come back on. If
the button or buttons do not re-light or start blinking again,
press CANCEL and re-perform the timer programming
procedure from the beginning.
● If for some reason the remote control's signal is not received
by the video recorder, press CANCEL and re-perform the
timer programming procedure from the beginning.
1
2
4
5
3
6
8
0
7
9
2
1
3
PROG.
NUMBER
ILLUMI GUIDE
OK
CANCEL
8
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
START+/–
STOP+/–
DATE+/–
TV PROG.+/–