JVC HR-J278EU - Manual (Page 33)

Filename [HRJ278EU3.fm]
Masterpage:Right
EN
33
Swap Channel Positions
Example: To swap PR 03 and PR 09.
A
Access the Main Menu screen.
Press MENU.
B
Access the Confirmation screen.
Press rt to move the highlight bar (pointer) to
“MANUAL CH SET”, then press OK or e . The
Confirmation screen appears.
C
Select the position. (e.g. 03)
D
Select the position. (e.g. 09)
● To cancel the channel swapping, press w .
● Repeat steps 3 and 4 as necessary.
E
Close the Confirmation screen.
Press MENU.
Fine-Tuning Channels Already Stored
A
Access the Main Menu screen.
Press MENU.
B
Access the Confirmation screen.
Press rt to move the highlight bar (pointer) to
“MANUAL CH SET”, then press OK or e . The
Confirmation screen appears.
C
Select the channel to fine-tune.
D
Perform tuning.
E
Close the Confirmation screen.
Press MENU.
Press rt until the section of
PR “03” begins blinking,
then press OK or
e .
● Only “03” will blink.
Press NUMBER keys to input
“0” and “9”. The two
selected channels will be
swapped.
Press rt until the channel
you want to tune begins
blinking, then press OK or
e
twice.
Press rt until the picture is
its clearest. Then press OK.
● Repeat steps 3 – 4 as
necessary.
HRJ278EU3.fm Page 33 Wednesday, March 14, 2001 3:11 PM