JVC HR-J278EU - Manual (Page 24)

Filename [HRJ278EU2.fm]
Masterpage:Left
24
EN EDITING
Edit From A
Camcorder You can use a camcorder as the source player and your
recorder as the recorder.
A
Make connections.
Connect the camcorder’s AUDIO/VIDEO OUT
connectors to the recorder’s L-1 IN/OUT connector via a
cable adapter.
B
Set the recorder’s input mode.
Press AUX (NUMBER key “0”) and/or PR on the remote
control to select “L-1”. You can select the input mode
also by pressing
9 [PR], and then 5 [PR+] or 3
[PR–] on the recorder. See step 2 in “Basic Recording”
(
੬
pg. 16).
C
Set the edit mode.
See “PICTURE CONTROL” on page 27.
D
Start the camcorder.
Engage the Play mode of the camcorder.
E
Start the recorder.
Engage the Record mode of the recorder.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select “EDIT” to dub tapes in step 3, be sure to
select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.
Your recorder
Audio/Video
cable
(not provided)
VIDEO OUT
AUDIO OUT
Camcorder
Cable adapter
(not provided)
Player
HRJ278EU2.fm Page 24 Monday, March 12, 2001 10:28 AM