JVC HR-J278EU User Manual
Page 21
Filename [HRJ278EU2.fm]
Masterpage:Right
EN
21
E
Enter the channel position.
F
Return to the normal screen.
After confirming all information is correct, press PROG or
OK. “PROGRAM COMPLETED” appears on the TV
screen for about 5 seconds, then the normal screen
appears. If “PROGRAM OVERLAPPED” appears on the
TV screen, see page 23.
● Repeat steps 1 – 6 for each additional programme.
G
Engage the recorder’s timer mode.
Press
#
(TIMER). The recorder turns off automatically and
#
appears on the front display panel.
● To disengage the timer mode, press
#
(TIMER) again.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 5, press WEEKLY (NUMBER
key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily
serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears
on the TV screen. Pressing the button again makes the
corresponding indication disappear.
NOTE:
You can programme this recorder to timer-record as many as
8 programmes. If you try to programme the recorder to record a
ninth, “PROGRAM FULL” appears on the TV screen. To record
the extra programme, you must first cancel any unnecessary
programmes (
੬
pg. 22).
Press PR +/–.
HRJ278EU2.fm Page 21 Thursday, February 22, 2001 1:32 PM