Edit to or from another video recorder – JVC HR-J278EU User Manual

Page 25

Filename [HRJ278EU2.fm]

Masterpage:Right

Edit To Or From
Another Video
Recorder

You can use your recorder as the source player or as the
recording deck.

Make connections.

Connect the player’s 21-pin SCART connector to the
recorder’s 21-pin SCART connector as illustrated.

Set the input mode of recording deck.

With this video recorder, press AUX (NUMBER key “0”)
and/or PR on the remote control to select “L-1”. You can
select the input mode also by pressing

[PR], and then

[PR+] or

[PR–] on the recorder. See step 2 in

“Basic Recording” (

੬

pg. 16).

● When using another recorder as the recording deck, refer to its

instruction manual.

Set the edit mode.

See “PICTURE CONTROL” on page 27.

Start the source player.

Engage the Play mode of the source player.

Start the recording deck.

Engage the Record mode of the recording deck.

NOTES:

● All necessary cables can be obtained from your dealer.

● When you select “EDIT” to dub tapes in step 3, be sure to

select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.

● When you use this recorder as the source player for editing, be

sure to set “O.S.D.” to “OFF” before starting (

੬

pg. 27).

Video
channel

21-pin SCART cable

(not provided)

Recorder

Your recorder

Another recorder

Player

TV receiver

RF cable
(provided)

Video
channel or
AV mode

21-pin SCART cable
(not provided)