JVC HR-J278EU - Manual (Page 14)

Filename [HRJ278EU1.fm]
Masterpage:Left
14
EN PLAYBACK (cont.)
Manual Tracking
Your video recorder is equipped with automatic tracking control.
During playback, you can override this and adjust the tracking
manually by pressing the PR buttons.
1 Override automatic tracking.
Press p on the remote control.
2 Adjust the tracking manually.
Press PR + or –.
● Press p again to return to automatic tracking.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
Activate Instant ReView.
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it’s found,
playback begins automatically.
● You can access a programme as far as 9 index codes away
from the current tape position. To watch the first of the 3
programmes, press REVIEW three times. The recorder searches
and begins playback automatically.
● The Instant Review function will also operate if the recorder is
turned on.
● The Instant Review function does not work during Power Save
mode (
੬
pg. 28).
HRJ278EU1.fm Page 14 Thursday, February 22, 2001 1:32 PM