JVC HR-DD855EK - Manual (Page 24)

24
SPATIALIZER
Soundtrack Selection
Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing AUDIO on the remote control changes the soundtrack being played back as follows:
TRACK
Recorder's Front Panel On-Screen Display
USE
+ HI FI
For Hi-Fi stereo tapes
L R
HI FI
For main audio of Bilingual tapes
L
HI FI
For sub audio of Bilingual tapes
R
NORM NORM For audio-dubbed tapes
+ + NORM
HI FI
For audio-dubbed tapes
NORM
NOTES:
● " + " should normally be selected.
In this mode, Hi-Fi stereo tapes are
played back in stereo, and the normal
audio track is played back automatically
for tapes with only normal audio.
● For instructions on recording NICAM
stereo and bilingual programmes (See
above).
● Bilingual programmes are not currently
broadcast in the U.K.
● "O.S.D." must be set to "ON" or the on-
screen displays will not appear (
੬
pg.
36).
Receiving NICAM Stereo
And Bilingual Programmes
Your recorder is equipped with a Digital stereo sound
decoder (NICAM), making reception of stereo and
bilingual broadcasts possible.
When the recorder is tuned to a different station, the type
of broadcast being received will be displayed on the TV
screen for a few seconds.
NOTES:
● The NICAM audio programme will be recorded on the
Hi-Fi audio track, and the Standard audio programme on
the normal audio track.
● If the quality of stereo sound being received is poor, the
broadcast will be received in monaural with better quality.
● Before playing back a programme recorded in stereo, or a
bilingual programme, refer to "Soundtrack Selection" (See
below).
● "O.S.D." must be set to "ON" or the on-screen displays
will not appear (
੬
pg. 36).
● To listen to a stereo programme, press AUDIO until " "
and " " appear on the front display panel or "HI FI
L R" appears on the screen.
● To listen to a bilingual programme, press AUDIO until
either " " or " " appears on the front display panel or
"HI FI L " or "HI FI R" appears on the screen (as
required).
● To listen to the Standard (regular monaural) audio while
receiving a NICAM broadcast, press AUDIO until
"NORM" appears on the front display panel or on the
screen.
ADVANCED OPERATIONS (cont.)
– –:– –
1 2 3
4 5 6
7 8 9
0
2
4
1
3
AUDIO
Type of Broadcast
On-screen Display
Being Received
Regular Monaural (none)
NICAM Stereo ST NICAM
NICAM Bilingual BIL NICAM
NICAM Monaural NICAM
Selecting The
Sound You
Want
OK
MENU