JVC KD-AVX33 - Manual (Page 197)

OPERATIONS
39
ENGLISH
Using the Bluetooth audio player
* 1 Each time you press
5 ∞, the registered device
names (and “NEW DEVICE” when a new device can
be registered) appear in turn. You cannot select “New
Device” when a Bluetooth audio player is connected.
* 2 Appears only when the information comes from the
device.
* 3 Indicates the button pressed. It may be different from
the operation status.
* 4 When a cellular phone with audio function is
connected, appears.
You can use the following buttons on the remote
controller for the Bluetooth audio operations. For
details, ☞ pages 8 and 9
15: 45
FLAT
Connected Device Name
Bluetooth Audio
POWER ]ON
Pause
Reverse/forward skip
* 1
Status of the device * 2
Signal strength/Battery remainder
☞
page 48
List menu icon
AV Menu
Setup Enter ENT
AV Menu
List Enter ENT
~
Select “Bluetooth Audio.”
Ÿ
Start playback.
• See pages 33 to 35 for connecting a new device.
• See page 35 for connecting/disconnecting a
registered device.
• See page 35 for deleting a registered device.
When the sound is stopped or interrupted during
the use of a Bluetooth device, try the following
remedies.
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the
device again. (☞ “Connecting/disconnecting a
registered device” on page 35)
You can use the following buttons on the remote
controller for the Bluetooth phone operations. For
details, ☞ pages 8 and 9. • Preset List can also be accessed through <AV
Menu>
= <List>.
* 3
Turns Blue when the Bluetooth
device is connected.
* 4
Bluetooth Information:
If you wish to receive more information about
Bluetooth, visit our JVC web site.
Book 1.indb 39 Book 1.indb 39 07.2.1 8:22:56 PM 07.2.1 8:22:56 PM