To set the transition resume direction, Next transition key behavior, To set the next transition key behavior – JVC KM-H3000E User Manual
Page 22
16
To set the transition resume direction:
1.
Press MENU.
2.
Press the PERS Wipe Pattern button.
3.
Press NEXT until Resume is displayed.
4.
Use the Resume knob to set the transition
direction used when a paused transition is
re-started. You can choose from the following:
• Fwd — The transition completes as originally
set.
• Rev — The transition reverses and the
switcher returns to the on-air state it was in
before the transition was started.
Next Transition Key Behavior
You can choose whether a Key remains in the Next
Transition area or is removed if a dedicated key
transition is performed.
To set the Next Transition Key behavior:
1.
Press MENU.
2.
Press the PERS Wipe Pattern button.
3.
Press NEXT until ARKey is displayed.
4.
Use the ARKey knob to set whether a Key
remains or is removed from the Next transition
area after a dedicated key transition is
performed. You can choose from the following:
• Off — The Key is removed from the Next
Transition area after a dedicated key transition
is performed.
• On — The Key remains active in the Next
Transition area after a dedicated key transition
is performed.
4
2
3
1
4
2
3
1