Intel IB850 - Manual (Page 43)

BIOS SETUP
IB850 User’s Manual 39
Advanced BIOS Features
This section allows you to configure and improve your system and allows
you to set up some system features according to your preference.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Hard Disk Boot Priority Press Enter ITEM HELP
CPU L1 and L2 Cache Enabled Menu Level >
Hyper-threading Technology Enabled
Quick Power On Self Test Enabled
First Boot Device Floppy
Second Boot Device Hard Disk
Third Boot Device CD-ROM
Boot Other Device Enabled
Swap Floppy Drive Disabled
Boot Up Floppy Seek Disabled
Boot Up Numlock Status On
Gate A20 Option Fast
Typematic Rate Setting Disabled
Typematic Rate (Chars/Sec) 6
Typematic Delay (Msec) 250
Security Option Setup
Select Hard Disk Boot
Device Priority
APIC Mode Enabled
MPS Version Control for OS 1.4
OS Select For DRAM>64MB Non-OS2
Report No FDD For WIN 95 Yes
Small Logo (EPA) Show Enable
Hard Disk / CD-ROM Boot Priority
This item allows you to set the priority for hard disk boot. When you press ent er,
the selections shows the current hard disks used in your system as well as the
“Bootable Add-in Card” that is relevant to other boot sources media such as SCSI
cards and LAN cards.
CPU L1 and L2 Cache
Cache memory is additional memory that is much faster than conventional
DRAM (system memory). CPUs from 486-type on up contain internal cache
memory, and most, but not all, modern PCs have additional (external) cache
memory. When the CPU requests data, the system transfers the requested data
from the main DRAM into cache memory, for even faster access by the CPU.
These items allow you to enable (speed up memory access) or disable the cache
function. By default, these items are Enabled.
Hyper-Threading Technology
This feature is enabled when your processor supports Hyper-Threading
Technology. Otherwise, this field will be hidden.
Quick Power On Self Test