Integra DTR-7.6/6.6 - Manual (Page 88)

88
Controlling Other Components —Continued
You can program the remote controller’s Macro buttons
to perform a sequence of actions.
Example:
To play a CD, you typically need to perform the follow-
ing actions:
1. Press the [Receiver] Remote Mode button to select
the Receiver remote controller mode.
2. Press the [On] button to turn on the AV receiver.
3. Press the [CD] Input Selector button to select the
CD input source.
4. Press the [CD] Remote Mode button to select the
CD remote controller mode.
5. Press the Play [ ] button to start playback on the
CD player.
You can program a Macro button so that all five actions
are performed with just one button press.
Making Macros
You can make one macro for each Macro button, and
each macro may contain up to eight commands.
Note:
• If one or more of the buttons you used to make a macro
are taught new commands, the macro will no longer
work properly and will have to be made again.
Running Macros
Deleting Macros
Using Macros
1
1, 3
Remote
indicator
1 While holding down the Remote
Mode button for the mode you
want to start with, press Macro
button [1], [2], or [3].
The Remote indicator lights up.
For the CD example in the left column,
you’d press and hold the [Receiver]
Remote Mode button, and then press
Macro button [1], [2], or [3].
2 On the remote controller, press
the buttons whose actions you
want to program into the macro
in the order you want them per-
formed.
For the CD example in the left column,
you’d press the following buttons:
[On], Input Selector [CD], Remote
Mode [CD], Play [
].
3 When you’ve finished, press the
Macro button again.
The Remote indicator flashes twice.
If you enter eight commands, the pro-
cess will finish automatically.
1 Press the Macro [1], [2], or [3] button.
The commands in the macro are transmitted in the
order in which they were programmed. Keep the
remote controller pointed at the AV receiver until
all of the commands have been transmitted.
Macros can be run at anytime regardless of the
current remote controller mode.
1 While holding down the [Receiver]
Remote Mode button, press the Macro
button whose macro you want to delete.
2 Press the Macro button again.